Viewing all customer Discussions for:

39-520 13-1/2" Operator Track

FMS co A 90 LScrew spacing is 4 1/8"Approximately 1951Arm is 9.5"

cant seem to find the identical part. the windows have no markings as to brand name. crank mechanisim has no visible markings as well. looking to replace with OEM if possible. I am assuming the windows to be about 20 years old.

Looking for a replacement for this window operator. I don't see any that have an 11" arm, but I think 11" or 11 3/4" will work. Also, I don't see any with a 1/2" square nylon slide that matches mine. I think a wheel will work, but I'm not sure whether another attachment style wold work better. ... (cont.)

I need to identify these wood casement window cranks to replace 2 pairs (2 windows, both left and right crank). They are completely stripped and wont take a handle anymore. I tried to order some through our local small town hardware store and they didn't work. The windows are on an Adirondack camp f ... (cont.)

Hello - Our home was built in 1970. We believe that the kitchen casement window is original. It is a double casement 52" Wide X 42" High. The windows do not crank open unless we push on the glass while opening. We are looking to replace the hardware on both sides. We would like the inside levers to ... (cont.)

Greetings from E. Tennessee!We need to replace numerous Window Crank/Gear Assy.'s for our Anderson Casement windows and I would appreciate any assistance in selecting suitable replacements.I have attached numerous photos for examination.Anderson Crank/Gear Assy. # 7073B Left & RightLength of Arm ... (cont.)

Please identify the parts I need to replace existing casement windows hinges or operating mechanism.

Believe they are Anderson windows, installed in building between 1960 and 1962. house completed in 1962. Have not been able to find replacement, parts for latches and the cranks no writing or numbers on any of the hardware

Trying to identify the right replacement for this broken crank.

Need a left and a right side

The window to the left of this one is .missing the complete lever,, need to be replaced

Hi, I'm looking for a replacement Crank arm as well as an operator. I believe the crank arm (based on other posts) is your part number 39-286. The only identifiable part number on it is 60-C-7041-62. As for the operator, I only see the number 81 on it along with Andersen and R with an arrow. Pl ... (cont.)

Window crank on left side ( turns clockwise to open) won't close window full way . I want to replace inside and outside hardware on both sides

Hi, I cant seem to find replacement on the website.Robert

Hi,I need help with replacing the hardware on these older windows I believe from the 80's.There are 8 total but I am sending pictures of these 4. I drew the dimensions on the pictures.I can customize as much as you recomend so don't worry if yhere needs to be modifications to the wood. ... (cont.)

Anthony's decorative hardware Kevin

I'm looking for a left side opener for an Anderson casement window. The gear is skipping. I did not remove the wood trim, but the arm is between 10 and 11 inches long. The hardware with the crank handle is 4 inches wide. Can you help?

These are for a 1959 Airstream with Hehr windows Each window has a left and right operator.

The bottom of the silver opener part shows a 13 in a circle and says US Canada Patent 2006

Need to find similar or same parts