Viewing all customer Discussions for:

39-520 13-1/2" Operator Track

Anderson 2420 RH can't find one

All It has marked on it is Anderson. I just need something to replace this not sure it matters the brand.

The handle spins, and the window does not open.

This hardware was installed around 1953 when the house was built. No markings that I can find. One operator (now missing) is for the right side of the frame. The other for the bottom. I believe the missing operator is identical to the other. I don't know if I need new tracks or if the existing ones ... (cont.)

Can you identify assembly or way to repair gear teeth?

I just need know a part number for this item so i can get it with you guys if you carry it

I purchased the following part from you: 39-344 - Fenestra, Casement Operator, 9". It does not fit because the space between the metal cap and the arm exceeds 5/16". My old casement operator has a 5/16" space between the metal cap and the arm. Based on my research, the correct Fenestra part no. ... (cont.)

I ordered two 9" window cranks (for R and L sides). Item #s were 39-021 and 39-020. I then ordered parts that actually attach on the window but they were the wrong thing. Not compatible with the cranks I purchased. What would be the appropriate item to order?

I need to replace Wood Casement Window Straight Arm Operator 0531108 7073A. Do you have a new casing that fits? Thanks

On the arm that moves the window in and out, says Anderson 7073a under neTh that a R. The locks themselves work fine, anderson7047r. I can open and close the window, just not tightly. And when I go to unlock the window to open it, it's as if the window does not move out a bit when the lock is releas ... (cont.)

Window lock back plate is 3" , screw holes are 2 3/8 center to center . The window crank is 8 1/2 " to the long side touching the gear . It has 4 screw hole , 2 on each side of crank , screwing into small blocks located in the window frame

No identification names or numbers . Larger pic is window crank part and smaller pic is window lock

Hi - had a break-in on NYE through a small side window in our kitchen. Trashed the bar that opens the window (not sure of the proper name) - approximately 7" measured from the gear in the handle housing. Need a replacement - thoughts?

I have 3 windows I need parts for . They have a left and right opening window on them, I need 6 latches , 3 left hand openers and 3 right hand, hope the pictures help

Hello. I am attaching photos. My window will open but takes a while to shut and realized the handle piece only, is stripped. Do you sell a replacement handle piece?

Aloha, We have some old windows that have a handle that slips on and then we have to awkwardly crank the window open. (handle like this: https://www.swisco.com/Wood-Casement-Window-Operator-Brass-finish/pd/Casement-Window-Replacement-Operators/39-268) we would like to retrofit it with some handles t ... (cont.)

Working on a house i believe was built in the late 60's and windows appear to be original however cannot find any marking or part numbers of any kind. Any help would be appreciated

This is a part that is glued to the window of an RV. A wheel attached to the crank rod roils along the track to open and close the window

The cranks need to attach on the window sill. Thank you. Harriet

Hello, I'm just looking to find a replacement window operator for this window. I can't seem to find the exact part on this website. Appreciate the help!