Viewing all customer Discussions for:

55-043 4" Sash Stop

I have a Milestone Single Hung Series 1000 windows and have several have become broken I need the channels which measure 29 inches and they are stamped 28C. I am in need of the 2 side channels, also the top pieces for the window (both sides) and the top sashes (all pictures have been attached). Tha ... (cont.)

Hello, do you have replacement this. Thanks

Can you tell me if you have these parts two pics of glazing bead on Sliding Glass door and two of sash stops for windows.Will not removed glazing bead till I can get new ones.

Hi helpful person, Do you sell a part like this? It is from a vinal replacement window (probably obvious). It is approx 4.5 inches long, about 1 1/8 inches wide at the widest. The vertical bars that hold up the diagonal pieces are about 3/4 inches apart. Thanks for your help.

The first picture is the top, the second picture is the side. Would the sash stop you have in stock fit my window? It seems that my sash is a little smaller than your measurements.

Hardware Identification.

3 different size single hung window balances needed: 17-2. ( need 6 of them) 13-2. ( need 4 of them) 23-3. ( need 2 of them)

2" x 7/8" snap in trim piece

The sash weights 16.4 lbs. Lenght of balance is 24 inches(not including brackets on each end) Can you make sure I order the correct parts. Need 2, 1 for each side. I also need one pair of window stops, measured 3in long, 1.25in wide, white.

10 ea. of part shown in photo 1-2-3. Beleive it's a window stop10 ea (left and right) of latch shown in photo 2 and 310 ea of balance shoe shown in photo 4Color is to be white for the stops

Hi. This piece is used to cover the top of the spring of a Kolbe double hung window. I think it also prevents the window from being opened all the way to the top. Can you tell me if you have this item? I have 20 windows and they have all cracked due to age.

I need to purchase more of these pieces, wich has been referred to as window clips in you tube videos. They stop the window from going up too high

Are these Series: 770 or 795? I need: 10qty SWISCO Series 24" Channel Balance Sash Support System. " ": 11qty window latches that holds window in upright postion. " ": 11qty window locks If you provide me w your email, I'll provide more pics.

I am trying to find white plastic snap on sash stops as shown in my photos that fit the measurements shown-either 3 or preferably 4 inch long. Do you carry these?ThanksAlan

Looking for the plastic rectangular piece that is a 'stopper' so the window doesn't go too high in the frame. 3"x11/4" wide, they snap into the top of the frame

I took off a broken block & tackle balance in a 20-yer in Milgard window sash. I easured it: its metal channel is 33" long, it is 1/2" wide (actually measures 9/16"), it has a printed stamp on it reading "32-4" and both plastic ends have wings. From your visual catalog, it seems that my Swisco rep ... (cont.)

Hello. This piece of plastic snaps into the top of my vertical sliding window. The brand is milgard. It prevents the window from opening too far. I believe its called a sash stop, but I'm not certain of that. Its 1 1/2 inches wide. It has small "hooks" on the edges that I tried to get into the photo ... (cont.)

Hi, looking to see if these parts are available?

Hello we have 2 large Midgard windows that need all new bakancers and shoes, 3 springs each at 9lbs we were told. 1 window needs a new tilt and pivot bar. We watched the video and don't want to cut the vinyl to remove and install the new balancers is there a special tool that can spread the chan ... (cont.)

*Length of the metal channel 25 5/8 *The printed stamp 25 4 *Manufacturer Milgard *Channel width 1/2, in the photo of the bottom fitting doesn't show the metal hook because is missing/broken this is the reason I need to replace it *I need 4 balances