Viewing all customer Discussions for:

15-121 Pivot Shoe, 9/16" Thick

I have about 8 windows in my house that will not stay up. I think the shoes are completely missing or broken. I recently moved away and live about 5 hours from my house (I'm prepping to rent it out in the near future). So unfortunately I don't have access to take the shoes out and provide more pict ... (cont.)

Right hand side of window sash has a broken off pivot bar. The picture is of the Left hand side both the pivot bar and the female portion. I do not see any numbers or markings on the parts. The windows are 20 years old.

Hello I recently purchased s shoe (15-129) from you only to find out it was the right size just not the right fit for the spiral balance. Attached you will find a front and back photo of the type I require. Please advise what I should have purchased? Thanks Cindy

Hello I am trying to find a replacement for my pivot show but not sure which one I need to purchase. Could you tell me based on the picture? Thanks!

I am a landlord who is now disabled. My tenant has a problem with a window. It seems to have become detached from the spiral spring thing and cannot close. I am unable to go there and these are the best pictures I have been able to get from the tenant. Since I cannot go there I do not know if ... (cont.)

To whom it may concern, I need to know if these replacement parts are available and what is the cost for each of them. Thank You, John

Hello, I would like to order some replacement window parts, I need one 24 inch spiral balance (see pictures). And one pivot shoe which I believe is part number 15-121. One spiral balance charging tool. I am uploading pictures however would like to order parts and will do so after hearing back fro ... (cont.)

I am in the process of moving from spiral balances to block and tackle style balances using the 770 series balance. I ordered a few parts to make sure everything would work before placing my full order. The 770 series balances are working great as a replacement for the spiral balances. I originally ... (cont.)

I need to replace my pivot lock shoes. Visually, it matches your part 15-121. Dimensionally, it is between your 15-047 and 15-121. Height = 2.030, Width = 1.250, Depth = 0.600. The depth expands to 0.671 when the lock is rotated 90

Which shoe is the correct replacement for attached dimensions? I suspect it is 15-047 but measurements are only close. Thanks in advance for your help

can you identify the part the picture is the left side, I need the Right side.

I am replacing spiral balances on my tilt windows. I need the 900 series balances (3/8

Greetings, I think I need your Pivot Shoe 5/8/Thick (product code 15-047) However the demensions on mine do not match your drawing..........Close but no cigar... The dimensions that don't match are (1.) the 5/8 thickness measures 0.600 and (2.) the height of 2" measures 2 1/8. Hummm I think it will ... (cont.)

Hi, I need help identify this part. I know you have different sizes. Thanks Mary

I'm trying to find pivot shoes for my patriot 2000 (ryan homes) vinyl single hung windows. Your 15 129 has the right dimensions, but I'm trying to tell if the upper cast metal guide for the spiral has socket to accept a retaining screw. From the pictures on your website other similar sized model hav ... (cont.)

Pivot shoe identification

I am trying to locate pivot lock shoes for a vinyl window and don't know the window manufacturer. I have attached a .pdf file picture of a good lock. It is 2 1/16" long, the lock in 9/16" and the channel in 1 1/2" wide and 5/8 deep. From the dimensions I presume that the part 15-121 is the most l ... (cont.)

The channel that these fit into is 1+1/4 inches wide and 9/16 inches deep. I need 14 of these, hopefully better quality. There are no markings on the windows. Thank you

Hello, I am looking to replace the spiral balances on my window (23" Series 600 Spiral Tilt Window Balance), and the pivot shoe is roughly 1/2" thick. The problem is the recommended pivot shoe from your website for me seems like is the following one: Pivot Shoe, 1/2" Thick, Product Code: 15-0 ... (cont.)

Dear Sir. I had Wintech Industries double hung tilt-in vinyl windows installed in 1997. I need to remove pivot shoes. The side jambs/rails have no cut outs. I tried your 75-069 jamb spreaders with no luck. Vinyl jambs are too ridge. Do you recommend I cut out a portion of the jamb to remove th ... (cont.)