Viewing all customer Discussions for:

26-243A Tilt Window Latch, Left Hand

Pat number 5.139,291. Letter F and number 75. Dimensions 2 5/8 by 11/16 with 3/8 depth. Need in white.

10c pat #5 139.291

Can you please let me know if you have the lock repacement parts. I know the windows are old. I have been in my house for 19 yrs and probably the windows were installeld 12 years earlier.

I have several broken balances, as well as the tabs for the tilt in sash. I also need three or four of the pins for the balance that attached to the window. I did not have enough room to send pictures of those

Need to get a few broken tilt latches replaced. I need a total of 12. Please review the photos that are included for further details and dimensions. The Pat # specified on the bottom of the part reads 5.139.291 Thank you in advance!

The windows are 30 years old possibly Anderson although no sure White w/ dimensions 2 5/8" long 5/8" wide 3/8 approx recess from end from dimension requested above Thank you for you help.

Ok don’t know the manufacturer but it’s a double coil with markings #5.0 35” P5232208 see picture.

Need replacement latches for 6 Norandex windows. Thanks

Need replacement part for window

You clearly show this style in your identification tutorials but I cannot find it in your inventory. I can compare dimensions of any products you suggest

Need 2 parts for window pin and release

Pat Pending 5139291. 2 5/8 x 11/16 x 3/8 has numbers 9D and 75 on underside.

I have a few window latches that need replacement in pairs. The part has the PAT No. 5,139,291 and 10B or 10C. The spring latch is curved on the part that slides in window track.

I’m looking for a set of latches like this.

need both side latches. 2 5/8 x 11/16. it looks like 26-244 or 26-244A but mine is open on the back side and yours has a backing. maybe an upgrade or interchangeable. Thank You

I need the window tilt latch in the photo. It measures approximately 3 in. I need a left and right and will take two sets if you have them. Thank you so much

On the tilt latch there is a 30L and 34R on the other part I did not see anything. I believe they are wenco windows from like1997 I purchased from Menards.

Clip to hold window in

I need 14 red tip spiral balances. They are 26" tube...3/8" wide tube . Also 6 green tip spiral balances 26" tube 3/8"wide tube . 10 pivot pins . 4 tilt lashes 2.5" long by 5/16 wide . Thank you Jim Schuler

Is this info helpful for what I need?