Viewing all customer Discussions for:

26-243A Tilt Window Latch, Left Hand

I have a building with about 60 replacement windows. I am not sure of the brand. I am looking for replacment parts. The pivot bar has no markings on it.. The international latch has 092 on the bottom locking tab and 11D on the bottom.

This latch does not screw in. It pushes into a slot on the side of the window. It measures 2 5/8” L x 3/4 " W X3/8" thick.

No names numbers or markings but the second picture shows the diagram off one I bought at home depot. It fits fairly snug so the demnsions are right or close enough to right but the tab extends out to one side so it doesn't line up in the window gap to lock it. The picture of the actual lock shows ... (cont.)

I need a left hand tilt latch. I have installed hundreds of vinyl replacement window's but that a long time ago. I am very handy.

I have attempted to get these parts thru norandex but the process is insane to say the least. The length of the part is about 2-11/16". I have included pictures of the window ID and the part I am looking for. I need 6 sets of these to start out with.

Need replacement latch for 2003 Certainteed window. I don't see anything similar on your site.

Which part # is tilt latch existing 2 5/8 x 11/16 and bottom of tilt sash exterior weather strip color white manufactured likely 2014 United window TY

Request # 36978919, Sorry, I didn't get back to you in time with these photos. I have two window sashes, each one weights 18 pounds a piece. I have attached the photos of the pivet shoe that I need 4 of and the 1/2" coil spring, I will need two left and two right of the coil springs. I need the latc ... (cont.)

I need a left/right pair of concealed internal tilt latches for a ~28-27-year-old vinyl double-hung tilt window. Overall latch length is 2 1/2”. It has a rounded underside body, rectangular finger-slide opening, snap-in tabs. Photos attached.

Trying to find a replacement.

I need two of the snap-in vent latches and the matching metal keeper. The window manufacturer is unknown.

I'm missing the tilt latch assembly for my window and I'm trying to identify and order the correct part.

Need to replace internal tilt latch that broke and window won't stay open.

Hello, I have tilt windows with many of the latches that are broken and need replacement. I think they are internal? I'm not able to identify which ones to order. I believe the measurements are: width: 11/16"length: 2 11/16"Those are the exact measurements from my ruler, but maybe there are more co ... (cont.)

tilt latch

Hello, we need a set of tilt latches, R / L. Attached are photos. The marking reads: PAT. # 5,139.291 7F It measures 2 1/2" x 2 3/4" x 5/8"

I can't find a logo anywhere on the windows. I need 6 pairs of latches.

Part unlocked the window for tilt wash

Need replacement tilt latches for Andersen Silver Line windows. Latch is 2 5/8 x 11/16

Wondering if you could help me identify what latch to purchase. It's roughly 2.70 inches long and just shy of 0.75 inches wide. It's got a clear plastic bottom cover. I unfortunately don't have any info of what brand the windows are.