Viewing all customer Discussions for:

15-143 Coil Bushing

Looking for coil balance replacements for my NAPCO window. I had some spares which I purchased from you several years ago. I tried them but they do not hold this particular sash up. This sash weighs 15lbs. Looking for the correct ones.

I am looking for these online. If I get these parts (need for 3 windows) will I have to pop the whole window out to replace them? Please advise. Thanks. I have ordered parts in the past so may have an account.Ali

Good Moring I'm trying to figure out what part I need for a window repair. Can you help me please. thank you.

My vinyl replacement windows are probably 20 years old but by in large in good shape. I have noticed that when cleaning several of the balance/coil parts have started to break. The metal cylinder component part has broke and the window pin doesn't stay in. I have looked at many sites and can't fi ... (cont.)

Dear Madam/ Sir, My name is Sundar from the Netherlands. I would love to order several parts to fix my windows all over the house. I could not identify the exact parts, mainly I'm not sure about inches converted into mm. So I took some pictures next to a lineal to show you the size of the part. I ... (cont.)

I need two sets (2 left and 2 right) of replacement balance shoes, And 2 replacement pivot pins. I believe these were manufactured by Alliance Window Systems approx 20 years ago. If you have replacement parts, I would like to purchase.

I need to replace the coils and shoes on my window. Each side has 2 5k coils and what looks to be the 15-177 shoe per the look and measurements. I don't have any of the coil barrels or caps to hide the coils when in the track. Are you able to let me know what other parts I need to complete the job ... (cont.)

Please let me know which balancers I should order. This broken one is from the left side of the lower window. It's a Comfortworld window. The bottom window is 26x26.5 The glass on the window is 23 1/4 x 23 3/4. I need balancers for both sides of the lower window. Thanks Bill

Can you please help identify these parts the windows are in good condition but just won't stay up. I need 5 left and 1 right. Please let me know what you think.

I am looking for the lift mechanism, locking pivot, pivot pin (looks like a straight pin with 2 screws up through the bottom of the window. And the pivot latch which slides into a pocket on the window. The one pictured is popped loose. Can you help without any more disassembly of the windows? ... (cont.)

Purchased a condo at the coast. Windows are probable 15 yrs old. No stickers to ID window

Dear sirs: Have Trustgard window with broken coil balances. Window pane is approximately 21" square. The only marking on coil is letter C. Need 2 sets as both broke. Weight is 10 ibs Thank you.

Hello, the sash weighed 18.6 ibs. Im needing the coil balance and accessories for one sash.

Hi I am looking to replace the window balance systems in 10 windows in my house. My house was built in 1996. I currently have double coil window balances, one coil is #5, I can't see a stamp on the other coil. The windows are single hung vinyl windows, can't tell the manufacturer. The pivot block is ... (cont.)

Hey, trying to find some parts for Dbl Hungs on a house I'm working on. I need shoes and coil spring help. I also need the pivot bars (26-226) and sash latches (26-110,111), but I already identified those on your site. On my old coil springs, I looked for a stamp on the two tapes that are connected ... (cont.)

Looking for replacement Balance springs for single hung window. Here are the approximate Dimensions:Width - 1 1/2"Depth - 15/16"Height - 4"

No mfg identification on the window or any parts. The parts I need are for the lower sash of a double hung. There is a "10" on the coil spring which is included in the 3 attached pictures. The overall window size is 36"x52". The lower sash size is 33"x26" I am looking for both the pivot shoe & coil ... (cont.)

I have window need part to repair it

Hello - The window code on the gold label UL-2, shows the manufacturer was Alside Products (acquired by Associated Materials.) The gold sticker doesn't show much information clearly. I attached it, along with the other sticker that showed the mfr date but not much else other then the PO @ 2260 an ... (cont.)

I need the entire setup you see in the pic!