Viewing all customer Discussions for:

58-001 White Pile Weatherstrip, 3/16" x 5/32"

I purchased the 3/16" by 5/32" wool pile to replace stripping in interior aluminum storm windows. After further examination of the window, I have determined that the weather strip does not go into a channel but is rather applied to the edge of the frame. Do you have any suggestions for how to adhe ... (cont.)

I need a Medium Density Window Pile with the t = .187 and the pile .1 inch high Thanks Tom

I'm trying to repair old aluminum storm windows. I sure could use your help in identifying the correct parts. I need new weather stripping as shown in photos 1 & 2. I also need to replace the 2 top corners with the little latch that broke off. Thank you

The track in the removable double hung aluminium windows that I have (no name available), are not made to slide new wool pile in place. However using a small straight screw driver I can remove the old ones as the backing seems to be made of cloth. Due to wear it is hard to tell if I need the 58-001 ... (cont.)

The windows are 21 years old. The name on the latch is Alenco. The rubber piece when flattened is the same width as the piece it sits on which is 5/16 of an inch. At that point the piece wraps down 3/16 of an inch and then into a groove

my old wool pile is crushed, cannot get accurate measurement of height of pile. Don't know if I should use product code 58-001 or58-002

Hello, I'm a new home owner and have noticed that a majority of my vinyl double hung tilt windows are weather stripped with worn out wool pile stripping. My question is do I have to replace this wool with new wool? Or is it possible to put another sturdier material in the current wool pil ... (cont.)

I recently ordered item # 58-127 but could not get it into the tracks of the window. The base was too large. On measuring again I believe I now have a more accurate measurement of what is needed.... a 1/8 x 1/8 black weather-stripping. When I last called you requested photos of the window. All ... (cont.)

These are old storm windows, probably installed in the 1970's. The photos are the best sample I could find. Most other places are shrunken/disintegrating. For the weatherstripping/wool pile that I need to replace, I measure the width of the base as 3/16". But the height seems to be 1/8" or l ... (cont.)

The storm windows are possibly from the 1960's? The profile of the weatherstripping is very narrow (1/8 " - 3/16") and the depth is hard to determine because it is so worn - maybe an 1/8". I have included images showing an overall half section of a storm window, details of the weatherstripping b ... (cont.)

Hi, My name is Lou, my wife and I live in Sistersville, WV where we purchased our home in 2010. The back side of our house has some old aluminum storm windows that the insulating stripping is gone. This weather stripping sits in a groove in the aluminum window frame. I'm able to put a 3/32 drill bit ... (cont.)

the pile is so badly deteriorated i really can't measure height. if the space for the pile between the window and frame is 3/32 what height pile would you recommend. i wasn't sure how tight to make it. the base measures 3/16

I ordered 3/16" x 5/32" white wool pile which is the right size and it fits great; however, when I push the window back in place and raise or lower the sash the wool pile partially slips out of the track, either up or down. How can I get it to stay in place?

Attached are pictures of the base and height of my storm window wool piling weather stripping. The base is 1/8" and the height 5/16" Do you stock this size? If not, can you steer me in the right direction? I'm not sure of the window manufacturer.

I am planning on replacing the pile on my stormm windows. Looks like 3/16 wide will do but not sure about height (3/16 or 1/4). Also should I purchase with or without Fin Seal? Any difference between white or gray other than color? I believe the storms that I have are from Harvey Industries. Thanks ... (cont.)

Hello - I need some white finned wool pile but don't see my size on your site. Am I looking in the wrong place? I need 3 1/6" wide at the bottom with the wool being around 7/16" tall. Can you help? Thanks

we have these storm screen alumni parts that need repair, there is no name on them but the clips are almost gone on all of them and some of the weather striping needs to be replaced

Hi, Attached are pictures that I took of a piece of the weatherstripping on our window. Unfortunately I don't have any info on how old these windows are or what brand they might be. Hope you guys have a replacement part in stock as I'd love to make the windows seal better. Thanks & happy tha ... (cont.)

I need to replace the wool pile in a number of my windows. The plastic or vinyl base of the wool pile has essentially begun to disintegrate causing the wool pile to fall out of the channel that runs around window. The wool pile is 1/8" high and the width of the channel it sits in is about 3/16" wi ... (cont.)

Hello, it looks as if I have white pile that measures 1/4 x1/4 and does slide into a track but I can not find exact. What would be my closest to look at. photos attached. thank you.