Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

Hello- Similar to what someone previously posted several years ago, I am seeking weather-stripping for old casement windows installed around 1988. I have attached several photos. Dimensions are: Push-in double barb is about 1/4" long. The length of the main base is 1/2" wide. The height of ... (cont.)

I need to replace the weatherstripping on my crank out casement kitchen window. I believe it is a Patriot window and was installed when the house was built in 1994. I've attached photos and the measurements I took are as follows: The base is 1/4" the "bubble" (although deformed) seems to be ... (cont.)

Windows installed inn 1991, wooden window. If you have this (or similar product) great. Can you ship to Canada?

I attach photos of the cross sections of old and recently bought seals. They are very similar dimensionally. My problem is that the new replacement seal does not fit in the kerf easily. The old seal fits well and this may be a consequence of its age. I tried using a normal screen roller without su ... (cont.)

The angled piece of this bulb seal broke in the window requiring replacement, can you please help me identify the correct part. I need 3 at 36 inches long.

Hello, trying to identify the following weatherstripping. Not sure the manufacturer. This stripping is on the casement window jamb not the sash. It has a bulb seal on a channel.

I have older wood windows and I am trying to find weather stripping to replace the old ones. If you need addtional details or photos please let me know.

I have 4 windows that were put in 13 years ago that just didn't hold up at all. I must replace these windows but the original windows were put in 33 years ago are fine (except for the)striping. Can you please match this striping? 14 windows need this and if it comes in a roll i will need about 72 ft ... (cont.)

I have a casement window in my house which is is very good shape, but the seal is rotted off. I have attached a drawing with the closest measurements possible. Do you think you can help me with a seal?

I have purchased a house with 30 year old casement windows. The seal system is dry and hard and has been painted a few times. The seal system has two components to it. A bubble type strip that sits in a groove in the window frame. The opening section of the window frame would close and press aga ... (cont.)

I received the subject order of 58-055 : 9/32" Bubble Seal with angled base. I like the product very much. But, do you have the same except a bit smaller? A shorter, smaller barb with a smaller bubble?

Want to replace old brittle rubber gasket / weatherstripping on crank out Truth (30744) windows. Here's a few pics of what I have that I want to replace.

This is from an exterior door weatherstripping that was installed in 1999. I believe it is a Marvin brand door. Can you help me find this weatherstripping and the manufacturer that makes it? I need to replace it. Marvin is of NO help! Thanks

I'm looking for a replacement weather stripping for the bottom portion of my Craftline awning window. This weather stripping installs on the bottom sill of the window frame just in front of the operator. I just placed an order through Swisco for the operator on which the crank failed on the old on ... (cont.)

I'm replacing the bubble seal on my vinyl casement windows. I can remove most of it w/o problem except for few areas where the bubble part has seperated from the flange part that secures it in the track. I'm having a devil of a time trying to remove it so I can insert the new stuff. Any suggestions? ... (cont.)

This is Kerfed in weatherstrip that goes around a casement window that was manufactured in either 1998 or 1999. I'm a dealer for Weathershield and it's not ours. I saw a Pella picture posted by one of your customers and it looked pretty similar. I need about 300'. Thank you.

The sliding door is a KK and the weather strip and the rail cover are damage. The weather strip attaches to the rail and the rail cover by a withe rigid plastic on the weather strip. The rail cover has a small grove for the withe rigid plastic on the weather strip to attach. The length of both price ... (cont.)

This weatherstripping is from the bottom of the lower sash off a double hung window. The angle is about 1/4 inch on each leg, the included angle is a little less than 90 degrees and the bubble looks like it started out as a cylindrical tube about 1/4 inch diameter, although it's now pretty flat. ... (cont.)

Hello! I need weatherstripping for my front door. The problem is that the kerf slot is 90 degrees off from the conventional location (please see photos). I would like to take advantage of the kerf and install weatherstripping with a kerf barb system, not peel and stick weatherstripping (I just remov ... (cont.)

This is for older Thermal/ever guard windows with Truth hardware. Im worried about removing a sample because its becoming brittle(sun damaged)and it seems to be really attach well to the sill-frame. Im guessing that it could be pulled-out like most weatherstripping.