Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

I received the subject order of 58-055 : 9/32" Bubble Seal with angled base. I like the product very much. But, do you have the same except a bit smaller? A shorter, smaller barb with a smaller bubble?

Want to replace old brittle rubber gasket / weatherstripping on crank out Truth (30744) windows. Here's a few pics of what I have that I want to replace.

This is from an exterior door weatherstripping that was installed in 1999. I believe it is a Marvin brand door. Can you help me find this weatherstripping and the manufacturer that makes it? I need to replace it. Marvin is of NO help! Thanks

I'm looking for a replacement weather stripping for the bottom portion of my Craftline awning window. This weather stripping installs on the bottom sill of the window frame just in front of the operator. I just placed an order through Swisco for the operator on which the crank failed on the old on ... (cont.)

I'm replacing the bubble seal on my vinyl casement windows. I can remove most of it w/o problem except for few areas where the bubble part has seperated from the flange part that secures it in the track. I'm having a devil of a time trying to remove it so I can insert the new stuff. Any suggestions? ... (cont.)

This is Kerfed in weatherstrip that goes around a casement window that was manufactured in either 1998 or 1999. I'm a dealer for Weathershield and it's not ours. I saw a Pella picture posted by one of your customers and it looked pretty similar. I need about 300'. Thank you.

I have more than a dozen Kolbe & Kolbe wood casement windows which were installed in 1994. I have attached a photo which shows the window. The weatherstripping needs to be replaced. I have attached a photo which shows the weatherstripping. I measured the bulb portion of the weatherstripping with ... (cont.)

The sliding door is a KK and the weather strip and the rail cover are damage. The weather strip attaches to the rail and the rail cover by a withe rigid plastic on the weather strip. The rail cover has a small grove for the withe rigid plastic on the weather strip to attach. The length of both price ... (cont.)

This weatherstripping is from the bottom of the lower sash off a double hung window. The angle is about 1/4 inch on each leg, the included angle is a little less than 90 degrees and the bubble looks like it started out as a cylindrical tube about 1/4 inch diameter, although it's now pretty flat. ... (cont.)

Hello! I need weatherstripping for my front door. The problem is that the kerf slot is 90 degrees off from the conventional location (please see photos). I would like to take advantage of the kerf and install weatherstripping with a kerf barb system, not peel and stick weatherstripping (I just remov ... (cont.)

This is for older Thermal/ever guard windows with Truth hardware. Im worried about removing a sample because its becoming brittle(sun damaged)and it seems to be really attach well to the sill-frame. Im guessing that it could be pulled-out like most weatherstripping.

having a hard time locating a weatherstrip for my Crestline SGD's from the early 90's. Does anyone have any in captivity, or a functionally equivalent replacement?

I am trying to replace weatherstripping on integritywindows (2003). Integrity windows rep has not called me back with replacement weatherstripping. I have inclined paid of both types I need but cannot find exact replacement. Stripping on right replacement I believe will be 58-055??? The one on t ... (cont.)

As you can see this window seal has an insert tab 1/4" long with single barb Bulb is pretty well mashed but not too far off 9/32 size Insert tab to center of mashed bulb more or less 7/16 Is your 58-055 bulb seal as close as it gets? Will double barb work? Thanks, Tom

Inquiring if you have the attached window weather-stripping. Thank you.

In an attempt to fix replacement window leaks(crooked windows), I tried sticking some self sticking foam pieces on botton weatherstriping that meets bottom of window sill. It did not work and I ended ripping some od the pieces! Would you have something similar to my imaged section? I need 131 inches ... (cont.)

I am replacing the weather seal in all of our Scherer Brothers Far North casement windows that were installed in 2000. Most of it is cracked or falling apart. I purchased a 58-055 sample to tryout and it seems to fit the kerf fine and does a great seal. I noticed that the original installed seals ... (cont.)

It looks like Product Code: 58-053 will fit my application. Do you have this foam filled like my sample? Thanks, Tom

Need help identifying this weatherstrip. It is from a Semco window that was from a home built in 2000. I found a close one on your site, but am not 100% sure it is the one.

GOOD FRIDAY AFTERNOON! Trying to find a replacement for WeatherShield brand double hung windows. Need the weather strip seal that fits on the bottom of the bottom window. Their part # is 8045. Will your BUBBLE SEAL WITH ANGLE BASE (58-055) replace this seal. THANK YOU ... JOHN