Viewing all customer Discussions for:

81-020 Sliding Door Roller, 1-1/2" Concave BB Wheel

House built in 1987 8ft single pain aluminum sliders, 1.5d wheels, I measure 3/4w, 1 9/16h, 2 3/8L, have 3 8ft sliders to do I think it's your 81-020? or not?

For my sliding door internal photos I also need the internal lock!Thank you for you help

These are 30 yrs old, I believe the company is Harcar (a FL company). The rollers look like your 81-020 or 81-261 (whats the difference?) Many thanks

Hi can you help me identify this roller? 1.5 inch steel roller. The aluminum frame is 1 15/16 wide by 1 9/16 high. It says DISCO 1214 on the side. There are no other markings I can see Thanks

Everything is rusted. Thanks for helping.

I have a number of patio windows with rollers that need to be replaced. Each window has two roller assemblies, and each window weighs 20-25 lbs. Since the windows are exposed to water, the roller itself needs to be plastic, like the existing ones, or something other than a metal that can rust. Atta ... (cont.)

I recently ordered part# 81-081 which I thought matched the ones I am replacing but I was wrong. I had purchased rollers for an identical patio unit about 3 years ago but there is no history of the part # that I had order. I need help to identify the part that I need.

3/4" wide 2 7/16" long 1 1/2" high 1 1/2" wheel diameter Notches are 13/16" from the top.

need rollers for PGT sgd - about 25 years old - just before they started with impact glass (mine are not impact)

Would be beautiful if you can identify today so I can locate and buy. Measures 2-3/4 long 3/4" width and 1-9/16 height. 1-1/2" roller wheel 2 holes

Height 1 9/16" Width 3/4" Wheel Diameter 1 1/2" Metal wheels Flares are slightly lower than center of adjustment screw. Center of flares are 1" from top

Need 2 rollers and one door hardware. Roller box is 1 1/4 inch by 2 1/4 inch. Wheel is 1 1/4 inch across.The RV is a park model manufactured in 1991. The sliding glass door was manufactured by General Aluminum Products, Inc. In Charlotte, Michigan.

Here is a wheel I cannot find quite right match in your system The housing is ~1 7/8" long the flair width is ~ 13/16" the housing width itself about 9/16", roller is 1 1/2"dia. Housing height is 1 9/16"

These patio doors are original to the house built in 1984. No markings on the rollers or the door frame. Please let me know if you can help identifying them.

attached are pictures of the removed roller. I am looking to purchase 12 rollers.

Sirs, I have two sliding patio doors that have become very difficult to open and close. The doors are about 8 feet tall and quite heavy. I was no longer able to adjust the wheel height and I assume the wheel assemblies are rusted or corroded making the adjustment difficult. I also no longer have the ... (cont.)

Please help me identify replacement.1 5" metal roller. 3/4" housing with 2.5" housing length. 1.5" housing height. Thanks,

doors are 30+ years 30. the rollers do not screw into the frame. how do i get them out of the door. I believe they snap in but not sure. this is the best picture i can get. i am afraid to pry them out of the frame in case i am wrong

Hello Do you have a replacement roller for the GACO 4030H. The sliding door is approximately 28 years old. Dimensions are 1 1/2 inch wheel diameter. 13/16 inches wide base. 1 1/2 inches high.

I received the rollers I ordered. Unfortunately they are slightly bigger than the current rollers. I'm attaching a picture, looks like an 1/8" too big. The wheel itself is 1 1/2" I saw the model 81-261 was wondering if that might work?