Viewing all customer Discussions for:

81-020 Sliding Door Roller, 1-1/2" Concave BB Wheel

I believe I have a PGT door and the 81-020 roller looks like it will work. Can I get your opinion on this ?? Best regards, Mike

Hi, I have a 3 panel sliding patio door on a lanai. Manufacturer was "Florida Extruders International" and it is a "Series 1000". Each door has two, single roller units on either end. Looking to find a replacement model. The picture shows the parts I removed. One part has "D-1106" printed on it. ... (cont.)

I need two new rollers for the PGT series 2500 sliding glass door leading to my lanai. The home was built in 2004. Can you please identify the roller assembly for me and place an order for two of them?

The top roller in this photo has two wheels that have a black core with a steel edge. Can you recommend a good replacement roller from this photo?

Model A-S 8192 one end has threaded hole to mount and above that is an additional screw for height adjustment

Height 1 9/16 Length 21/8 Width 11/16

I just moved into a rental house that was built in the mid-1980's and am trying to identify the make and model of my back patio sliding glass door. I have checked every surface of the frame and glass for identifying marks and have only found the Guardian glass info on the pane and markings on the in ... (cont.)

Need to replace both rollers on late 1970s aluminum patio door. Single rollers are installed -- Either single or double rollers are fine based on your recommendations. 6 pics are attached of the roller currently in place.

Hi, I'm looking for a set of replacement rollers for my sliding glass door. They're 23/32" wide x 1-9/16" heigh with a single 1-1/2" diameter metal wheel.Thank you for your help. Thanks Mike

Need this roller but in a vinyl wheel configuration.ThanksJohn

Door is from 1963. No identifying name. Wheel dia. 1.5" assembly overall width .760" no counting detents. Overall height 1.44" overall lenght 4.125. Please call me with any questions 808 896 3911. Need four assemblies or just wheels if you don't have tha assembly. Wheels are 1.5" o.d. .350 wide. The ... (cont.)

some background information in case its useful, I am in south florida and the house was built in 1994. I bought the below part for the same door and it fit perfectly, in case these are somehow related. https://www.swisco.com/Sliding-Door-Handle/pd/Patio-Glass-Door-Replacement-Locking-Handles/82-0 ... (cont.)

Looking for a pair of roller assemblies for an very old sliding glass door. I have searched far a wide and can not see anything like this. Any help would be appreciated.

only markings are" 64300"

Trying to find replacement. It's marked Disco 1103. Width is 3/4 Height is 11/2 Wheel is 11/2 OD and is 1/4 inch diameter.

Hello, I am looking for a replacement roller for my kinco doors. Attached is a picture of the label on the door.

door was purchased home depot 30 years ago. This is a 2nd request never got confirmation of first request.

The doors are 40 years old. I have not been able to find parts locally. The measurement is about 1.5 inches wide & 2.75 inches high. Do you have replacements? Thank You??

I have a set of Pan American sliding glass doors that need replacement rollers. The sticker on the door jamb says Code 15-3, Series PA-9-1. I can't find anything that matches the roller assembly anywhere. Thanks.

I need to find out what rollers these are. Nylon roller held in by one screw with adujustment screw below the mounting bolt. Also, how to I get the rollers out? Need 8 rollers.