Viewing all customer Discussions for:

81-228 1-1/4"dia Nylon Concave BB Wheel

I own a boat in the Florida Gulf region. Rust and corrosion are my permanent enemies. I just bought the 81-090 roller and the 81-228 nylon wheel / Now how do get this wheel off the roller and install the nylon one?

The doors were installed in 1977. There are 8 doors total in 2 units we own. All the rollers need replacing.

need two sets of tandem rollers for an old aluminum sliding glass patio door. can't seem to find anywhere with the odd tabs. any ideas?

Says Kilian - Toronto, CA - Syracuse,NY

pulled this well worn roller assembly out of a 1960 vintage sliding glass door, any idea if one of the available replacement units would work? I'm assuming the only way I could find this exact unit would be salvage from a similar vintage door.... thanks for any help

We purchased a house with two sliding glass doors that need new rollers. We don't see any brand name markings on the doors, but the wheel is imprinted on the side with " KILIAN " TORONTO, CAN. SYRACUSE, N.Y. The wheel assembly is held in place with a 15/16 inch spring pin, and the wheel is hel ... (cont.)

Please look at the photos and let me know if there is a replacement for this.

I need a replacement part. The dimensions are the same as a 81-125 (2-1/8" x 1" x 9/16") with a Nylon 1-1/4" largest dia. (1-1/8" small dia) roller. There is a stamp of D-719 on the part with roller. These doors are likely 30yrs old. Thanks, Brad

Hello, I'm looking to replace my rollers with the assembly. There are two bigger ones and two smaller ones. I've posted pictures of them. I'm also looking for the two white plastic slides on the base inside of the door. I hope these pics help? These are off a 1988 36 ft.flybridge Tiara boat. Than ... (cont.)

Do you have something that would replace this hardware. The only markings I can identify are first on the wheel hub "OTI5"

I am looking for 4 door wall rollers that match these pics or ones that will work in place of these.

We are not sure what brand the sunroom is. And lowes does not seem to have the same size and match up as this. The part has one wheel.

Hello, I saw a previous post describing a "KILIAN" Rochester/Toronto, unfortunately the photos posted show a different assembly. Mine is made of extruded aluminum and slides into to an extruded aluminum door. The roller assembly is held in place by weight and mating extrusion configuration. Thank ... (cont.)

hi please can you identify these rollers and tell me a price for four (same) replacement rollers? the ruler is metric (centimeters) and the rollers are in a 1970s mobile home. there are no markings on the rollers or doors. the slots in the rollers slide into the aluminum door frame. thanks ... (cont.)

No other markings visible. Roller wheel for closet bifold mirror door.

Doors not closing properly, wheels need to be replaced and adjusted

HI My name is Leo . I would like tu find this kind of accesories for my sliding door Thank you

Measurement in picture: 1 1/4" wheel diameter. Mounted on a 5"x 27/32" steel plate that is about 3/32" thick. Holes are 5/16" from edges and with the exception of the one marked at 1 5/16". Wheel is center grooved and 5/16" wide. Bolt head has what appears to be 307A on top and L on bottom, 1 5/ ... (cont.)

My rollers have no casing. They have a pin through the middle which fits directly into the bottom casing of the door. I need 4. Can you help me out?

American Building Supply Inc. CAT II 400 lb impact strength, aluminum frame. Wheels in bottom of door, riding on floor track.