Viewing all customer Discussions for:

82-002 Sliding Door Handle Set, 6-5/8"

looking for this part, went to big box store but locks they carry are not 1" like the picture. Can you help me. Thanks Ralph

I looked through your website but was unable to find my hardware from the pictures. My patio door is about 20 years old. The opening in the metal door is 1" x 7.25". The opening is cut through both sides of the door and is located 5/8" from the edge of the door. I have attached several picture ... (cont.)

I am looking for a replacement lock mechanism for my sliding glass door which were probably installed about 1957. They were made by Metal Industries Type SGD Class B1 Model # UB01121 (the B might be an 8) and Series M11. The distance between the screw holes is 6-5/8". There is a push up/down ope ... (cont.)

Patent Number 3390557

What are the exact dimensions for this product?

I have a sliding glass door lock that is malfunctioning. When I lock the door to leave, the security lever jumps over to the locked position which makes it impossible to unlock. One part of the lock is stamped DNS Ind Miami Fla the inside part shows 16 inside pull standard dns ind 16. The outside wi ... (cont.)

This is for a 40 year old slider door. The current lock is missing the bar to latch onto. The distance from the mounting bolts is 6 5/8 inches. I need a replacement for the lock, handle and latch.

One patio door has been used all the time since home was built and need new roller assemblies. Inscribed on patio door is "Moss 3-73" and only identifying info on roller is DNS Industries out of Miami FL. I do not have photos of roller installed as you could not see it really. Had to remove side str ... (cont.)

Hello. I would like to find a replacement for the handle and lock (which has been removed) for this door. Please let me know if you can help. Thanks. Jon

I have identified the main lock as your part #82-002, Sliding Door Handle Set, 6-5/8" However, this part does not come with the other part, installed in the accompanying door, which grabs the pin (or teeth) coming from part 82-002 and locks both doors together. The doors were installed in 1992. ... (cont.)

I'm looking for parts for my sliding patio door. It appears to be an Acorn 1200 based on the label. House was built circa 1980 in Ontario Canada. Spacing on the mounting screws (inside) are 6 3/8". The part of the latch that one would usually use to lock the door is broken, and part of it is n ... (cont.)

Door Series 2000/930. The numbers on the hardware are too corroded to read. Hopefully you can help. There are not holes to attach a handle to the door, but a rectangular cut in the aluminum measuring approx. 5/8" X 67/8". The hardware fit into this groove and attached to the outside groove plate ... (cont.)

Hello AT 3670 357 See the pictures we have compare with your picture and it is ok but is it possible to get it with nylon rollers. Please answer us You will also see a picture with a door handle do you have that. I wait for your reply. Thanks Francine

I'm having difficulty identifying specifically which parts to order to repair my sliding glass door lock & handle. I have attached a few pictures to see if you are able to help me identify the replacement parts to order. If the pictures are not sufficient, please let me know what other information y ... (cont.)

Need to replace lock. Marking on lock set 8115 N.A 8120 N.A 8117 N.A

We just purchased an older home constructed in the early 80's that has three sliding glass doors. The locking mechanism is broken on one and we would like to replace all three. Hopefully the attached pictures help. I found a mfg label that I can still read what looks like: - Code 172-1 - Se ... (cont.)

Re: DNS Industries 12 Inside Pull, Miami FLA, -1400 Series & DNS Industries 13/23 Outside Pull, Miami, FL -144 Series Hi - I need to replace the above (currently no longer locks). What should I ask for? Can I get this from you? Look forward to hearing from you. Thanks Teresa PS: may ... (cont.)

Dear Swisco, could you please help identify my sliding glass door locks that i would like to replace? I have ordered some items but realized that i have two doors that require two assemblies each. I have enclosed some pictures for you to analyze. Thank you for your assistance. Jeff ... (cont.)

What are my options to replace this flush mounted sliding glass door handle assembly? 1" thick door. 6 5/8 center to center. Am I limited only to this type of handle assembly?

Can you please help me to replace two handles on two doors? I am including photos of the handles. Thanks, Amy