Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

Hi I'm looking for a replacement. Unfortunately there are no names or marking or numbers anywhere. I've included photos. Thank you for your assistance!

Hole Spacing about 3 15/16"

I have some old sliding doors that the piece that you zoom in on is what my switch will lock onto so it locks that door. I am looking for three of them if you have something like that thank you very much Greg.

Want to be purchased the same handles if you could identify what they are, I would like to order

I bought Mortise lock round face part number 82-218. Now I need to buy Handle set that works with this. Do you have one? See picture of the broken one. Thank you.

This is the only picuture and measurement I took. I need to replace the handle on my door becuase the hook locking mechanism has stopped working.

Spring is broke inside of lock so need whole new part.

I had to find someone with a camera so I could show you what I'm running into and ask for your help. Attached is one of the 3 handles installed that I need to replace. The inner handle is fine but the outer (keyed) plastic is chipping away from the sun and weather on all 3 handles. By looking at ... (cont.)

Good afternoon, I am hoping to find a replacement door handle for an old set that is from around 1955. I have attached photos. The distance between the installation holes is 4". Please let me know if I can provide any additional information. Thank you!

Hi, do you have a replacement part for the provided lock image?

The patio glass sliding door latch/lock is not working, it's stuck.

We have 2 sets of sliding glass doors from the 1950's or 1960's with Arcadia handles with locks. The handle mounting holes are 6 1/2" apart.The screws in the door jam holding the lock mechanism are about 4 1/4" apartThe handles are about 10" tall. Please see attached pictures for reference. We would ... (cont.)

Hello, I would like to replace my old sliding door locking mechanism. I have a very old sliding patio door with a locking mechanism that does not fuction properly. I was online and goolged some replacement accessories and found your website. Would you happen to have anything that I can replace my ol ... (cont.)

Please see the attached photos. As you will note, the latch on the doorside is broken off. The door is not labeled. I believe it to be fromaround 1960. Any chance you have something that can replace this, either just thelatch pin, or the entire thing?

Hello. Do you offer a replacement for the handle shown in the attached pictures? The latch is actually on the outside of the sliding glass door itself. The screw holes are right at about 5 inches apart. Thank you!

Hey, I have a sliding door handle from the 60s.i was looking to replace it do to not having a key to the lock. The top bolt it is broken inside the back end and just need a new one. I saw on the forms that someone else has a similar issue and was told to get a certain part that was 3 inch while I ha ... (cont.)

Sliding glass door, surface mount, internal lock handle assembly. Screw holes 4" spacing ( could be 3 15/16" ? ), door is 1 3/4" thick New unit does NOT need to have external lock

Folks, I am looking for a replacement handle assembly for a patio sliding glass door. The door is probably 30+ years old, and the handle was removed some years ago. The only markings on the handle are ALCRAFT and the number 1200-10. I have attached pictures of the handle and location holes on the do ... (cont.)

Dary products corp Miami, Florida

The patio door lock is broken , need to replace it , but hard to find the exact match. It is made by Vanguard.