Viewing all customer Discussions for:

82-106 Sliding Door Turning Lever

There is fixed handle on my Marvin slider 6' patio door. The lever behind it flips up to unlock the slider and flips down to lock the door. The lever must be broken because it just flops up and down easily with no resistance like it used to have.

The lock mechanisim is 10 inches long, 1/2 inch where the latches come out from (photo 3854) and one inch and a sixteenth deep (photo #3851). Photo #3851 also shows that it's slightly angled at each end of the mechanisim

I need to replace two #31761A "Truth" rollers, for an Anderson 8' x 8' white plastic sliding window, which looks to be of Canadian Manufacture.The opening for the roller is 4 1/2" long, 5/8" wide, and a depth of 1 1/2"Pictures are attachedI have two of your Model Roller 81-128 ...which, of course, w ... (cont.)

For door handle part # 1983

sliding door is about 12 years old , thumb latch is broken need replacement part

so is it a sliding glass patio door, the only thing I can see on the label is summit something, when I take the handle off the door there are two holes between the mounting holes, and then what you see in the photos. I'm looking for compatible door lock so we can keep it locked, right now we're just ... (cont.)

Need this indentified

This lock goes with me previous part upload

Sliding Glass Door Lever:NAMI NFRC 100/200 code spec Series:800 SGD MST:62610You guys sent me two levers: Item 82-106The lever stem that inserts in the lock is not nearly long enough. I will need two of them, so let me know if you have them an I will return the other two.Much appreciated,Mark ... (cont.)

Could you please help me i can't find this lock for my patio, i order 11" but its big , if you have hole set i will order

I need lock mechanism for my silver line sliding door

Hello my name is Bob, I live in Stuart Florida.I am looking for rollers for my sliding glass door hopefully I can get them in stainless steel?Please feel free to call or email.Thank youBob

I need this part for an ICW brand sliding door. 3 3/4" between screws. I have to pry the hook out so it will lock. Thanks Jerry

Hi I found part #82-239 and 82-259 somewhat similar to the one that is missing from my other existing door. Can you tell me which one I should get and please include the handle too because it's missing the lever latch. The hole spacing of the door handle is 3-15/16" and the thickness is about 1-5/ ... (cont.)

Not sure which one of your products will fit muy door. It is a Guardian brand door. Can you recommend a product that may work?

Thumb latch

The lock lever shaft that engages the lock tumbler has sheared.

I spoke with you a couple of weeks ago about my order for the 82-218 mortise on my patio door. I am enclosing two pictures that, I think, show what the problem is. Basically, the mortise seems to be working correctly but the latch lever does not have enough room to go down. When held straigh ... (cont.)

Door lock is missing. 8" handle with lever locking handle [also missing]. The male lacking mechanism opening is ~11 1/2" long. The female mechanism is in photo and appears to be a double lock. This piece is 10 3/4" long. We need whatever will fit and is required so we can install it ourselve ... (cont.)

Hello, I'm having hard time finding this part. Our sliding door lock(hook) got broken and I've been trying to get this part in few stores with no luck. Please let me know where I can get it 32527 Hook Up Align Keeper