Viewing all customer Discussions for:

82-218 Mortise Lock, Round Face, 3-11/16"

I believe this is a Rivco but there are model numbers on it. Do you have a handle and lockset that would fit?Thank YouJohn

We are looking for a replacement locking mechanism for our patio door. The screw holes for the screws in the lock pulls are 4 15/16" apart.

I'm not sure of the brand of doir

Need an exterior key lock for this slider.

Does anyone know which SWISCO slider handles I purchase to replace the two OLD ones on my Blomberg doors. The wood handle ( inside) is approx. 9 " tall and the plate it connects to is approx 7 1/2 " tall as is the outside handle (plastic). Thank you, Alan

The sliding patio door lock broke and I'd like to replace the door handle and lock.

We have a Pella Sliding patio door that is at least 20 years old or older. 1- We would like to add a keyed lock to the outside sliding patio door. It never came with a lock on the outside. This is a wood inside and aluminium clad outside sliding glass door. Can we order the parts we need to do t ... (cont.)

Need New Locking Mechanism and Keeper. Any guidance where to find such parts would be awesome! Thank you! Alex

Could not find any description on hardware. On door was Guardian door 1981 6206-1981. Spring broke. Would you have a replacement for this?

THE PORTION OF THIS ASSEMBLY THAT LATCHES ON TO INSURE THAT DOOR IS CLOSED IS BROKEN. ONLY NEED TO REPLACE THE PORTION OUTLINED IN BLACK VICTOR

Patio door lock tumbler won't stay up I believe broken spring. Distance between mounting holes 3 and 3/4 approximate. Recess opening approximately 3 3/8. Door thickness 1 1/2 inch

no numbers or name on parts but I do need a new lock and handles if the handle can have a lock and key would be very helpful please help.

Do you think your 89-086 can be used with the door in the attached pics? I don't know what model the door is. This is my house in Baja.

Looking for replacement for a 32435 hook up align keeper

How do you retrieve a replacement lock on a sliding glass door when it falls into the opening ?

I'm looking for replacement handles that don't stick out as far into the room as my WIPI handles do, these come out 2.75" from the frame. The 82-069 looks like it would fit (3-15/16" install holes) but I don't see overall dimensions listed for height and handle depth. Thanks

I have a sliding patio door with lost latch and keeper. The handle is wooden on inside and plastic on outside handle with 2 holes. Maybe 4" from top hole to bottom hole. I think the handle is 7" long. Info on handle is as follows: Canadian 919213 pat# 3596954. It's difficult to read. ... (cont.)

I would like a new handle with a new lock and keys if you have the internal locking mechanism I will also take that but not necessary.

Looking for a locking handle set for this 3 15/16" holes Home Depot

I have to return the 82-080 I ordered by mistake. Mine takes the 3 15/16" not 4 15/16.I believe the 82-086 will fit, it has the inside lever lower than center which seems to be correct. My worry is that the locking lever will have a square shaft entering the mortice lock from the inside (mine appear ... (cont.)