Viewing all customer Discussions for:

84-074 Screen Door Roller, 1" Steel BB Concave

I am trying to figure out if your part #84-074 will work for replacing the wheel shown in the photo. We have not had any luck with securing them from the mfg, or local dealers. Ours are held in by a removable pin and the end of the wheel housing (not shown in your ad) needs to match ours for ease of ... (cont.)

I have Traco screen door in my building and see a part that looks like what I need as a replacement.It matches up with your measurements but I would like to be sure. Your part # is 84-074. Attached is my photo of the part. Thank You, Mike

I have removed the two retaining screws on top but can't get the roller out of the door frame. Does the silver screw adjustment housing have to be removed also or does the whole unit just slide into the frame? I don't want to beat on the silver adjustment housing in order to remove the unit unless ... (cont.)

Does this 84-074 roller come with the mounting screws?? If not what size screws does the part need and do you sell them?? Please let me know Thanks Jim

I am with a Lumber company. We do offer some repair of screens and rollers on storm windows and patio door screens. I had a customer bring a patio door screen that needs a couple of 84-074. Can you help me help my customer, what brand does this roller fit?

Hi The roller i have is exactly like the 84-074 except it doesn't have the silver cap in the top center. Is that screwed in. Is that piece removeable? Thanks Steve

Are the 84-066 mounting holes spaced 2 1/16" on center? With an adjustment hole centered at 1 1/4" ? THANKS

I have a Marvin sliding patio door screen circa 1989 or so. The roller and bearing axle assembly broke off a 5/16" wide spring. It looks similar part 84-031 but different in that it looks like the "Stop" is separate from the spring portion. I can't get either the broken spring or stop out of the a ... (cont.)

I would like to have all the dimentions of the 84-074 before odering. Thanks TOM