Viewing all customer Discussions for:

90-009 Window Lock, 2-1/4"

Hi Friends, We and 4 of our neighbors need the same window latches. We probably need 20-30 of them. Can you please help us ? Thank you!! Gratitude, Linda

I need to replace this broken part

I need to replace several window latches. Where can I purchase them?

I bought the 90-180 sweep lock and the 90-183 keeper. But the sweep lock stands too high and won't engage the keeper like my old lock. It sits too high. Do you have anything with a lower profile? One of your customer service agents thought I should look at the 90-009 but that looks so different. ... (cont.)

i also need one spiral balance 3/8 inch tube.

Greetings. I have enclosed some photos or the balance removed from a house built in about 2006 here in Casa Grande arizona. I need about 14 of the balances. The metal measures 27,5 inches long, and 1/2 inch wide. Please advise on which model fits my needs so i Can get them on order asap. Also, do ... (cont.)

window latch

Latches for glass vent panel on a forged iron entry door

Good afternoon, I spoke with someone last week about my window troubles and looking for some help. Haven't been able to open the window for years and it's time to fix it. I'm very handy around the house and will fix them myself if able. Thanks in advance

Part No.#8244 is stamped onto the underside of my broken Sash Lock. My Harvey Windows were installed when my house was newly built in 1999. As the sash lock sits on the top of the lower inside window, its width = 2 7/8", by 3/4" deep. The (2) holes on this Sash Lock are 2 1/4" apart; measuring from ... (cont.)

Window locks

I have a Sliding screen door across the opening of my garage. The door panels use what appears to be a window sash lock to "seal" the panels. I need to replace one of those locks. The lock appears to be similar to the TRACO "Sweep and Sash lock" Model 50-603W. However, that the footprint of that ... (cont.)

I could use some part numbers for these parts. Only the right locking latch is broken but for spare parts I could use right and left locking latch and left and right tilt latches. Thanks.

We can not find any names, marks, etc

I am trying to find replacement parts for my double paned casement windows. The name on the windows is ," The Insulator ". I can't find this company anywhere.

This is my home window and I need both of the little locks.

A guest broke one of these latches. It looks similar to 90-009, but has a hook to catch the adjoining door. Do you have anything similar? The holes are 2-1/4" OC.

Do you have this PGT window latch?

Hi! I'm not the original poster but I'm also looking for a replacement of this part. I've attached a photo, the tongue is roughly 3/8s of an inch high and 3/4 of an inch wide. The screws you can see are 2 & 1/4 inches apart, the broken latch still has screws that are tricky to access/measure, but se ... (cont.)

photo is of original lock latch and keeper . previously different window latch broke and I bought replacement latch Barton Kramer window sash lock"355B 2 pack.The Keeper was still intact so I didn't attempt to replace it. However now that keeper did break, I threw it away and assumed the same hardwa ... (cont.)