Viewing all customer Discussions for:

90-161 Window Lock & Keeper, 2-1/16"

Windows are from Thermal Industries. They said to indicate DH700. Need help finding it on your website. Color is white

Openings from hole to hole measure 2 and 1/8 inch. No numbers or markings on the latch.

I'm looking for three window parts. The first two parts go to a crank window. I'm looking to replace the crank as well as the lock (since the lever is snapped off). The third part goes to a different window. It is a lock to a double hung window. The picture shows an intact version of the part. Sever ... (cont.)

I attached a diagram of the type of window lock I need. Please review and offer your best advisement

90-161 looks like it would work but I need to know all hole location dimensions on the lock . Looking for 11/16 on the backset

Edgemont vinyl replacement windows sash lock white

I'm looking for this milgard window latch. Let me know if you can point me in the right direction.

Window that I'm trying to fix. With your help I will fix it need these parts.

Im hoping you can help me. I recently purchased a house with 8 windows that aren't staying open. After examining the problem, it looks like the counterbalance spring pivot point is broken off the assembly. It look looks like the plastic piece at the the bottom of the counter balances are broke. ... (cont.)

About 20 years ago I installed Certainteed windows in my whole house. One of the windows came without locks. I am attaching a photo of the area where I want to install two locks. There are no pre-drilled holes. The narrow ledge on the upper sash is about 3/8 inches deep and the top of the lower sash ... (cont.)

I tried to order 24 of your 90-038, but it's discontinued. I can't take what you have left and mix in another style. I need them all to match. What do you suggest?

DRACO window locks. How could one simple lock have so many variations in size with the differences measured in 16ths? Tried replacing the locks thru the big block stores. Ha! no such luck. Help. I need nine locks.

Hello, Here are the pictures. 1. I need to replace the balance track. 20" tall, and the header and foot as shown. The balance shows 2140.I know we have integral with header and foot, please tell me the part number separately. (balance, header, shoe in case in the future use) 2. I need to buy some ... (cont.)

Need this part

Hoping you have something that will work, to replace these window locks. Please let me know. Sonia

I need to replace the lock/latch on this Simonton window. The inside portion is broken. The windows were installed in Sept 2007. They are tan colored. Replacing the latch is obviously easy.

I'm looking to replace some Milgard sash locks. Center to center on the holes is 2 1/8 inches. I found the recessed clasp part separately Which part do I need to replace this? I need 5. Thank you.

I believe this is a Millard window.

I am missing the "keeper"? part that the lock hooks into. The smaller back piece. This is one sliding vinyl window with two locks, both missing that smaller back piece. See the second photo of a different window which has the "keeper," for comparison.

I have three windows that the locking hardware is broken. I need the window locks that have ACAN logo on them and the hardware locks that allow the window to be tilted in for cleaning. I have not been able to find any other information on the windows. Please refer to the attached photos to help id ... (cont.)