Viewing all customer Discussions for:

91-026 Left Hand Latch

I need parts that secure windows to frames of storm windows. I ordered some that are to big.

I bought a few left (and right) hand latch - item # is 91-026 and 91-027 - from you. (left and above one on my pictures). Unfortunately, this has slightly bigger sliding head thickness (top portion on picture 8149) than my original one (right and below one on pictures. It lost its blade on this pict ... (cont.)

I'm looking to replace this latch & would also need instructions.The length of the latch is 3.5inches from the point & looks to be about .5 inches wide.

Storm Door is A.J. Manufacturing sold by Menards, probally 20ish years old. Need both left and right latch plus corners, will be ording 2 sets of latches plus 8 corners.

I regret not to have any photos of the parts installed. They are each a corner of one storm window frame. It became necessary to replace because the glass was broken. I am having a difficult time finding replacement parts.

I am looking for replacement left and right Side Bolts, window corner tilts, and corner keys for a 2020 Keystone Fuzion Rear Patio Windows. I have provided a picture with measurements. Thank you, Karl

I need both the left and right latch. There is a "1878" or "8781" molded in to the part. This is for a storm door.I need availability and total cost shipped.ThanksChris

This is a par of a triple track storm window that I need the pin repacked for a window section.

Do you have any of these corners and latches LEADER is embossed on them

Hello,Can you help identify the stops on these storm windows and if you stock them? And, if you could help me with how to take them apart. I have looked at your videos but the ones I have can not be separated by using a block of wood. The corners crack.I am thinking I need to drill out the recess bu ... (cont.)

I need replacements for right and left hand latches. Here are photos and a drawing with measurements that are pretty accurate.My husband says the material is pot metal.Please let me know which replacement parts you have that I can purchase and what material it is.Thank you so much,Chris ... (cont.)

To Whom It May Concern. The Broken Latch I have has the number of "1342" stamp on the back. This is very similar to item number 91-026. The only difference is the left end is design slightly different. Any help shall be very appreciative. Thank you. Greg

Hello,I like to put new glass into some old aluminum SEAL-RIGHT storms.The picture "Storm 1" shows a cross section of the old snap-in, where the associated dimensions are in drawing "Storm Seal-Rite 6...".As for measuring up the glass, I watch the video which instructed to measure the length between ... (cont.)

Looking for the left and right slide latch replacement for my storm window. Also need the corner latch. thanks

I've searched the Internet to include the Swisco part pages and am unable to find the two pieces in the attached photo. The storm windows on my house may be original to the 1973 house and one metal latch and many plastic tabs have broken. The plastic tabs are about 1" long. An intact one is s ... (cont.)

I was trying to put the window up & the frame broke & the window shattered. I think there is a corner pice that's broken. Do you have replacement parts for this window? Maybe a corner latch kit? The latch is approximately 3 1/2 inches long. Thank you for any help you might have.

I'm trying to locate a right hand storm window latch for my sears storm door. I looked on your website but I could not identify it. Request your assistance.Original Sears Door P/N 656.65103272Thank you,Paul

Need help with right hand latch for metal double hung storm window. Installed photo is for left hand, uninstalled is broken right hand

Can you please tell me I 91-026 and 027 work and do I need two springs, 91-102? Thanks John

Sirs: I am looking for parts to repair some Andersen Narroline storm windows. My most critical need is for the slide bolts. But I suspect I will also have to replace corner keys and tilt keys eventually, so if you can identify those and give me part numbers, pricing, etc. I would appreciate th ... (cont.)