Viewing all customer Discussions for:

S350-28 28" Series 350 Channel Balance

I can't find a part that matches what I have. The metal is 1/2" wide and 28" long.

Measurements are 28" long, slightly more than 1/2" wide. I also need the caps that attach over the end

measures length of metal is 28 inches

I need a replacement balancer. This is what is stamped on the balancer.

Please help identify the proper part I need for replacement based on provided pics

Hi, Thanks in advance for helping me identify the correct series. I have attached a bunch of pictures. It appears to be a series 385 balancer to me but not sure if it could be a series 380 too. The length of the metal part is 28".KS

The channel balancer has a stamp with the number 2740 on it. It is 28 inches long

I have an older (20 + years) S/H window that I believe was manufactured by M&I Windows and is stamped 2730. The series number on the sash label is "865" and the closest replacement I find for this balancer is perhaps the "385" series. However, the so-called "wings" on the balancer only exist on ... (cont.)

Need one pair 28 inch.

28" long metal part only. 27 4 BT Caldwell stamp please help.

I have attached photos of the window balance. Spring has broken on one of them and I am looking to replace two (2). The only marking on one channel balance is 27B - and it also has a USA marking engraved into the metal. The other is marked 27D. The balances are 1/2 inch wide and 29 inches long ( ... (cont.)

Can you help me identify which channel balance replacement parts and top sash I need for my windows? The length of the balance is 28"

I need a 1/2" wide channel balance to replace my 27 4 IR CALDWELL. Which balance do I need: S350, S351, S377, S380, S385, S390, or S395? I could not tell the difference from the website descriptions. I've included pictures of the ends of the balance. I have the weight of the window (sash). Also ... (cont.)

Hello, Can you please help me identify which replacement parts I need for this. One of pictures has a number stamped on one end of it.

Each one seems to have slightly different stamping. hoping to get 12 in need 6 for sure for 3 double hungwindows. Channel Balance Series: S350 Channel Length: 28" Channel Stamp: 27 90 or 27 9 or a 36 or 37 on the end Quantity: 12

Stamp 27 C BSI Length 28" Window weight 17 lbs I need 10 of these.

Hello, I am trying to find replacement for our window balances that have broken. The channel measures 28" long and 9/16" wide. One the channel is marked "27 4 JO Caldwell". The fitting is winged and the wings measure 1" wide and is also 1" front to back. Any help would be greatly appreciated. ... (cont.)

Channel balance post measurement is 28". Metal part only

I am looking for Caldwell channel balancer per the attached photos. On the old channel balancer its written 27 4 CO Caldwell. Please help me identify which one to order. Need 18 of them. Please note that the old balancers I am replacing has only bottom one winged but the ones I see on your webs ... (cont.)

I was wondering if your company had replacement window channel balancers? If you need more photos or a video to see it in full, I will happily provide in an e-mail response. -Kevin