Viewing all customer Discussions for:

S350-28 28" Series 350 Channel Balance

Hello, I am trying to find replacement for our window balances that have broken. The channel measures 28" long and 9/16" wide. One the channel is marked "27 4 JO Caldwell". The fitting is winged and the wings measure 1" wide and is also 1" front to back. Any help would be greatly appreciated. ... (cont.)

Channel balance post measurement is 28". Metal part only

I am looking for Caldwell channel balancer per the attached photos. On the old channel balancer its written 27 4 CO Caldwell. Please help me identify which one to order. Need 18 of them. Please note that the old balancers I am replacing has only bottom one winged but the ones I see on your webs ... (cont.)

I was wondering if your company had replacement window channel balancers? If you need more photos or a video to see it in full, I will happily provide in an e-mail response. -Kevin

Good Afternoon, My single hung window is not closing well and I will need replacement channel guides as I noted that one of the channel guides for the window has a snapped nylon rope. The metal part of the existing channel guide is 28" (only the metal part, not including the plastic parts). The ... (cont.)

Hello! My single hung window is very hard to open and close (one side is sagging and the channel guide pulley string is snapped on that same sagging side). I'd like to know what channel balance I need to replace the photographed part. The metal part of the existing channel is 28" (only the metal par ... (cont.)

Hello I need some help to select channels balance replacements for my windows. Thank you in advance!! The length is 28"

Channel Balance 28" (2730), Need Replacement

I've included the pics, there are 2 balances per window. I have 2 identical windows with bad balances so I guess I need a total of 4, 2 for each window. Plus the other hardware plastic pieces i think are broken. Thank you very much, let me know if you need more pics. the number on the bar was 2730. ... (cont.)

To whom it may concern, Hi, Just saw the YouTube video regarding the part from Caldwell. Here I have the pictures as attached: the lower bottom, upper part, and parts ID, length is 28.25", width is 0.5", and hope you can find out the right parts, so I don't have to remove the windows before I have t ... (cont.)

2730L stamped on it

Hello, I'd like to order balances from Swisco but am having trouble IDing the model. I appreciate any help. Thanks, Tim

Just want to confirm the correct clips and part. Need 8 total.

Length- 28 inchesStamp- 2730Needed- 8 total channels Any further information regarding the windows are unknown.Thank you, Rebecca

I need to replace the window balance springs. The weight of the window is 20 LBS. Please send me the item number of each part and the cost of each spring. Thank you so much! Gilbert

Good evening! Can you help me identify this part number? It is the channel balance for a vertical (non-tilt) window. My windows weigh 29 pounds. The balance measures 28" long and .5" wide. I am not sure what style the end attachments are. Markings are "27 9 JW CMC 11". If a more durable version ex ... (cont.)

The part is a 27-2 block and tackle side-load sash balance. It measures 28 inches long, 1/2 inch channel width, 5/16 inch channel depth.

Hi, I'm looking for the replacement part for the channel balance 28 inch. 2720 AF B.S.IAll details in these attached pics.RegardsAndrzej

The spring pulled the hole out of the block and tackle will need to replace several of these throughout my house. Once replaced is there any way to prevent this For future reference.

Hello, I need a replacement block and tackle. Below are the specs for my current equipment: Markings: BSI 2740 Metal channel measurement: 28 inches long 9/16 inch wide 10/16 inch deep The closest item I could find on your website that looks most similar to mine is: 28" Series 385 Channel Balance ... (cont.)