Viewing all customer Discussions for:

S350-28 28" Series 350 Channel Balance

Need your help to identify the right parts for my channel balance. Please include the top and bottom caps. non-tilt, length: 28" width: 1/2" or 9/16" stamp number: 27 4 FP CALDWELL Thank you for your help

These four metal channel and springs were not working in opening and closing the window This window is a doubled pan horizontal opening The stamp on the metal channel is 27300 and 27308 The metal channels comes with four springs Please identify me the correct part The parts are already in the cart. ... (cont.)

I need 4ea channel balance 2730. I think there is some plastic stops missing from my window frames for the channel balance's . When I look inside the window frame I see a square hole on top and a round hole on the bottom. I think there is supposed to be a stop in the top square hole but not sure. Wh ... (cont.)

I believe these are 2740 part from last purchase but need to confirm. Metal length is 28". Width is 5/8" at widest. 9/16" depth. Photos of ends attached.

Hi, I would like to have a recommendation for the window channel. The length is 28 inches. Thank you.

Hello, trying to find the correct window balance sash rebalance. It is 28 inches long and has 2730 written on it. Thanks!

Hello, I am looking for 28inch untilt window sash balance 2 pairs. Unable to find any print on the balance. the back of the balance 0.5inch wide. Side of the balance slightly more than 0.5inch ?0.6inch

The last image is not clear - my apologies. The text on the channel is: "27 4 Caldwell". I can't find anything else on inside or outside. The length is 28" (yes 28 not 27)! It is 1/2" wide and 5/8" deep. Kindly help to identify replacement channels.

Hello- looking for a replacement for stamp 27-4 JQ caldwell

My window balances look like the Series 350, cut a customer service rep says it looks like a specialty bottom. it's 7.8" from front to back, as he called it. I need two. 28" long 2730 stamp Can you expedite these?

Hello,I would like to replace channel balances on both sides of one of my bedroom windows. I was only able to attach 5 photos. If you need additional photos I have them and can send them along if needed. I also have a couple of photos of the 2 nylon fittings at the top of the window, that needs re ... (cont.)

Hi,The string on my balancer broke, the stamp says "27 4 IR CALDWELL", it's 1/2" wide, 28" long (not including the end pieces). Can you help me find the correct replacement?Thank you,Yun

I have a broken channel balance, the cord snapped, also the pin holding the spring broke. The housing is 34", the marking is 3330, which I believe means a 34" balance supporting 30 pounds weight. The other balance (which is not broken) is marked 3320. Does that mean it's a 20 pound balance? Or or ... (cont.)

Please help

27 7/8 in long Stamp is C 27 Don't know the manufacturer, but windows were installed in 1983. I need 4 balances.

Imprint says BSI 27-30 then maybe 06. It is shown in the pictures. Also the bottom end has side tabs.

All dimensions fit the 28" series 350 but I'm not sure on the end treatments. Also the existing channel has a stamp 2790 BSI 30. But I think your 2770 should work. See photos - Please advise Thank you,

Hello,Looking to replace a window balance but it seems to have odd dimensions. Balance is stamped with "27 1/2 3 JK Caldwell".I think this is what I need, but can you confirm if there are any compatible replacement parts available?Thanks!

Good morning, I am looking to replace the channel balances on 8 windows in my home. (16 total replacement pieces). It appears from measurements that it is 1/2 inch and 28 in length. I am struggling with the correct shoe and and top. Can you advise please. I live in the central valley of California ... (cont.)

2740 is stamped into the metal, the length is 28 inches long