Viewing all customer Discussions for:

S350-28 28" Series 350 Channel Balance

All dimensions fit the 28" series 350 but I'm not sure on the end treatments. Also the existing channel has a stamp 2790 BSI 30. But I think your 2770 should work. See photos - Please advise Thank you,

Hello,Looking to replace a window balance but it seems to have odd dimensions. Balance is stamped with "27 1/2 3 JK Caldwell".I think this is what I need, but can you confirm if there are any compatible replacement parts available?Thanks!

Good morning, I am looking to replace the channel balances on 8 windows in my home. (16 total replacement pieces). It appears from measurements that it is 1/2 inch and 28 in length. I am struggling with the correct shoe and and top. Can you advise please. I live in the central valley of California ... (cont.)

2740 is stamped into the metal, the length is 28 inches long

Hi there. I am replacing window balances and need help identifying the correct product. The marking on my current balances is "2730 BSI F". Attached are pictures for your reference. Thanks in advance.Jaime

Hello. Not sure how to identify with your part description. Aluminum measure 28" x 1/2". Appreciate the help.

I need to replace multiple window balances in my home. Can you recommend? I've attached pictures.

measure 28 inches.. need 16 of them

Please recommend which product to buy. Part stamp Caldwell 27 4 E O. I will need 4 total to repair 2 windows. Thanks, Stephanie

It looks like I need to balance channels and the clips

4 windows weight 14 lbs number on the balance is 2730W bsi, 1 window weight 21 lbs number on the balance is 2730F bsi, 1 window weight 29 lbs number on the balance is 2740F bsi. Need to order both sides 12 pieces. The steel balances are 28" long on all the windows Do you have sash guides for thes ... (cont.)

Hello, I am resending pictures of the balancer. Please advise if more information is needed. Sincerely,

2790 31 is the numbers on the channel. Length is 28" metal only. width is .5 " Hight is 5/8". I realize this may be a custom channel. Do you think the 350 series 2770 channel will work. I think I need the "Comes fully assembled with the 19-002 top and 15-004 (1-3/32" deep) bottom fittings and will ... (cont.)

I have one bad sash balance and would like to replace both. Window ID is LIN 1194 U32-HVS as shown in picture. I've uploaded a picture of the bad sash balance (the spring from it is missing) and a picture of what I believe the sash balance should look like. The length of the metal channel alone is 2 ... (cont.)

We need this part to fix our windows. The length is 28". Thanks

There is also stamped 2740 and I've measured the metal slide part at 28" long not including the plastic clips.

I am looking for a Window Balance: Series 350 28", Stamped 27000H

need replacements for sliding window sash balance for several windows.

I am in need of two of these 29" rails. Also need 1 of the plastic clip that screws into the window itself. Thanks, Andy

The problem with my balancer is that the cord broke. I hope to get a new one soon.