Viewing all customer Discussions for:

S350-30 30" Series 350 Channel Balance

I need to order 10 channel balances and 20 sash guides. Please see pictures. The windows are single hung (they do not tilt) and the metal part of the channel is 30" (not the overall just the metal). There are no markings on the channel balance.

I would like to know which part matches this balance.

I believe I need the S350-30 but want to check if possible. Stamp Caldwell 29 6

Good afternoonI followed the instructions on your website to identify and order a set or replacement window counterbalances. My order was for S350-30. I received the parts today and there is one small difference. It was very challenging select the top and bottom shapes from the pictures but I believ ... (cont.)

Looking for two of these.They are 30 inches long (metal part) and 1/2 inch wide (trade) widthStamped 29 6 HS CaldwellThanks!!Luis

Hi,Please find attached 5 pictures of the sash balance I need The length without the plastic tips is 30" and about 1/2 inch widthThanksManuel

Window block and tackle

I need replacement Channel Balances for my windows. Can you please help me identify the replacement parts and give me a quote? 29-9 KX CMC 11 30 inch with 19-002 and 15-004 (35lb sash). 29-4 LX CMC 11 30 inch with 19-002 and 15-004 (24lb sash). 29-4 KX CMC 9 30 inch with 19-002 and 15-004 (24l ... (cont.)

I need at least two of these maybe more haven't gotten to all my windows.I need to know the correct top sash piece that screws to the window frame to receive the balance.The balance has 2950 B61 swisco stamped on it.

I need a 30" Channel Balanced labeled 2930

Good evening, I need to order the window channel balance but I don't know what weight. The only number I found the bar is what is in the picture and I don't want to order the wrong one. Can you please help me.I'm going to order the 30" SERIES 350 CHANNEL BALANCE PRODUCT CODE S350-30.Thank You,I aw ... (cont.)

Please help me identify the part number for the balancer in these photos so I can purchase two new ones more my Milgard window. The metal part is 30" longThank you!Mike

Parts: (2910 Channel 30" 351 series) (Top Sash Guide,Kinco) 5/8"Width x11/16" top depth x1 3/8" top/bottom. This not exactly what is shown in the picture, but very close. I think it should work. If you think I should change anything other part that is fairly simple to do I will probably order that a ... (cont.)

The sash balances I want to replace measure the metal channel at 30? long, the shoe is 1 3/32? wide, and it is stamped 29 3 BSI PV. What replacement sash should I order?

Stamped on metal: 2910 NK BSI 30" long by 1/2" Flanged shoe. Entire assembly plus spring is broken.

I do not know the brand name from which these balancers come from. I would assume one could tell from the model number. It does not appear these come in right and left varieties , however, if they do, I need one right and one left. Also, I wonder if you have a distributor in the San Francisco Ba ... (cont.)

We need a quote for 2 kinds window balance as attached one1. 30" for 28~31lb window weight2. 27" for 28lb,30lbSpecially we need the part number for the bottom and top plastic parts.Thank youCharles

Hi!I have about 6 or 7, maybe more (need to check them), Lawson windows (non-tilt) that need new channel balances. The windows are about 11 years old. The plastic parts are breaking, or the string or some have the small metal pulleys cracking and breaking. Should go for replacing the entire assembly ... (cont.)

I need two balances.. I want to make sure I order the correct one.. the only markings are 29 9 BSI. I have enclosed a picture of the markings also.. thank you

Ther steel channel measures 30 inches without the nylon feet. The only numbers I can find are stamped on the channel 29 3 H I. Thanks for your help. Denny