Viewing all customer Discussions for:

18-036 1/2" Top Sash Guide

I purchased the sash guides 18-115, 18-064, 18-009 and 18-036 in hopes that one of them would be the correct one that I need. They were not. I have attached photos and a sketch of the one that I need. Can you assist in helping select the correct sash guide. Thank you very much.

For use with a Series 800 Channel Balance, I need the plastic piece that is held by one screw and located at the top of the window. It holds a 19-007 top in place. Also, if I buy a bunch of 15-018 shoes and 19-007 tops, what tool do you recommend for installing, to replace the existing rivets. Wi ... (cont.)

Hi I am replacing the top guides and spring/block and tackle hardware for (2) windows the actual window frame aluminum is 5/8 in cross-section, and the spring-channel part is 3/8"...I have included pictures but let me know if you need more... Thanks Rob

I have a window with both channel balances gone. The replacement top sash guide (I have one) is definitely the 18-036, which is 1/2" wide. Which channel balance? The 350 series is 28" long and 9/16 wide. The 800 is 29" long and 3/8 wide. The side of window has a 1/2" wide channel, w ... (cont.)

looking for a replacement part for a milgaurd window. The only number on the window was MG-1-ALI-CBA

Hello, this part is a plastic cap that sits on top of the window sash on each of the top corners. The cap engages with the spring, and helps to counterbalance the window. These windows are from a new construction home built in 2003. The part is a plastic piece, it screws into the window sash ... (cont.)

Hello, this is a top sash guide from a SunAir window. Can you tell me which part replaces this? I've tried to be as exact as possible on the measurements. Thanks very much, Tony P

I need to replace channel balance for a sun air window brand the number stumped in the part is 2720 P the metal part is 28 inches long as well i need a window lock and 2 top casing. Can you help me please.

I need to find a 1/2" width x 1/2" depth top sash guide similar to your 18-009 (which is 5/8" width x 19/32" depth). Is one available? Derek

Dear Swisco Thanks for your help on the phone. Attached are photos of the top sash guides I need (quantity 12). The channel balance replacement parts that I have from WR Hardware are 31-026-30-35 CHANNEL BALANCE -35", if that helps at all. I don

Will 18-036 work for me?

Please help me identify this balance and top sash guide. I think it might be a series 800.

Hi, any ideas on which sash guide this is? Name on window lock is sunair. Thanks Mel

Black top sash guide. Trying to find match from your inventory.

I am looking for this part not sure of the window manufacturer. But have looked in every catalog online with no success.

I need to rebuild the window parts for the Nu Air window in my home. I will need 2 each of the left and right parts pictured above 11/16" by 1-1/8 inch by 1-5/16" deep. Will send more pics for the rest of the parts

Hi there! I think I need a balance holder?? This part is screwed to the top of each side of a metal window with a 1/2" balance 19" long. I cannot make out what the part on the SASH should look like as not much is left. See pics :)

I can't seem to find the correct top sash guide for the above balance. Please see photos and let me know if you have them or what I can use. Note, a piece may be broken off on this one on the front. I believe it has a small lip, not sure. The biggest issue is the screw hole match up. Thanks ... (cont.)

Attached sash guide is broken as seen in the image. The 1/2" Top Sash Guide Product Code: 18-036, appears to match my dimensions. However, as you can see bottom half of the old sash guide in the image is completely open, but your part 18-036 has smaller opening. Question: 1 - Does it matter th ... (cont.)

I'd like to identify the proper replacement parts for my non-tilt aluminum window built by Florida Extruders in 2003. Enclosed are pix of the proper parts. I'm assuming the spring comes installed in the unit. I've enclosed a few pix...I figure the part number would be S380-29 for the balance, and 18 ... (cont.)