Viewing all customer Discussions for:

S351-28 28" Series 351 Channel Balance

This is for a non tilt window. The balance has completely come apart, but I was hoping to get an identification before odering. It's 9/16" wide and 28in long.

I am looking for 1/2" balances for Jordan Windows. The balances are 28 inches long. Attached are pictures of other measurements and ends. The house was built in 2006. There is a sticker on the window sill that says: Series 2112 AAMA/NWWDA 101/I.S.2-97 H-LC35-48X96

Hi, Can you identify the replacement needed for the channel balance on the photos? The model says U B 27B. Thank you. Kefa

Channel is 28 inches. nothing printed on it, window manu not known, the channel is a 1/2 channel. I will need about 6 or 7.

The balancer has the number 2730, and the length of the balancer is 28 inches. Please, let me know if you the replacement part available. Thanks, Pablo

28 inches long Stamp: DB D04 2750 Window installed in 2006 2 needed (for one window)

Channel weight is 28" Long Metal Part Only!, 2730 is Stamped on channel, Spring is 14" Long tip to tip, When it was given to me the cord was broken and I never saw any metal clips. House was built late 80's.

I have two sizes of channel balances. One measures 24" and I need 2 of them and the other measures 28" of which I need 6. All measurements where taken as was described in your YouTube video.

Channel balance

Three of my bedrooms have slide up windows measuring 35" x 58 1/2. The channel balance I measured metal portion end to end at 28". The markings on the metal are: 27 3 HW CMC 11. I've included 3 photos to make sure. I've YouTubed some videos on how to remove window and install the channel balanc ... (cont.)

Length: 28'' Stamp: 27 C B.S.I Count: 2

Hi, i am looking for replacements for these Window Balances. I need about 12 pcs but want make sure i am ordering the correct parts. The numbers on them show 2790 31 3.SI pa

Need channel guide for Jordan window

I am looking for 2 balancers. please see photos.

Hello. I am going to replace the channel balances of 15 windows and need to make sure I order the correct ones. I think the ones I need to order are 390-28 but please confirm for me. The measurements are 28in x 1/2 in. My windows are non tilted and there are no wings on the guides. ... (cont.)

28" 2740Y Which one should I order? Thanks.

Metal channel only 28" Overall length with plastic ends 29" Channel 1/2" wide

The aluminum channel is 28" end to end excluding plastic pieces. There is a label on the aluminum channel 2730 BSI ET as shown in one of the pictures. The pictures are from an operational unit. There are two single hung non tilt windows in addition to the one the pictures were made from. Each window ... (cont.)

Stamp says 2740 BSI O.H.

Attached photos that I need identification on. The stamp says 2740 and it has a roller.