Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

Hello, can you please help me identify which series for this 2640?

I was looking into why a window wasn't working and it turns out the slider is missing! Help!

Hello, my window will not open or close because this piece in the pic has come loose and slipped down. Can you please tell me what I need to order. Thank you

I think the 380 or 385 will work but not sure.

The windows were manufactured about 2003-04. The length of the metal channel is 27". The weight of the window sash is 19 lbs.

I have all the windows with the attached balancers marked 26 9 HR CALDWELL. The metal to metal height is 27 inches and the bottom width on the plastic is 1 inch per picture. can you tell me which balancer should I order from you? thank you

The channels are 27" from end to end. I have 6 of these that I need to replace. Each one is the same as the other. The windows are Milguard I believe - see latch on the top in picture. If i can get the right part, I can install them myself.

His balance measures 27 inches with the metal part. it looks like it is three-quarter inches wide and three-quarter inches deep. The window says it is a Kihro brand.

Hello, Please ID the sash balancer for this window type.

Hi I need these for 4 windows please. For Milgard Windows

Was hoping I could get a specification on what model I should be ordering. Chanel length is 27 inches

Hi there, my window sash balance stamps are different.One is 2640cj BX and another one is 2660 BJ as show on the picture.andMetal length is 27". Top and bottom are winged. Bottom guild are broken.Thank you.

The length of the metal channel is 27" It is marked '26-3 JQ CALDWELL' I'm uncertain about the depth and the width. The depth is 9/16" The width of the narrow side is 1/2" The width of the wide side is 19/32" Both top and bottom are winged.

Need replacement channel balance part# 26-4-CV=CMC-1

I need new channel balances for my windows .5 inch wide 27 inches long (metal only). Please see attached pics, I made composit images since this tool limits to 5 images. text printed on the side: 26 4 AP CALDWELLPlease, let me know if you need to know anything else to match them. Thanks! ... (cont.)

metal not including clips is 27 inches, 3/8 thick, can you help idenitfy this so I can order on your website for window that slides up and down, no tilt.

HI, I am looking for replacement channel body parts for my window. see attached photos. The channel is 26inches long (just the channel, not including the plastic guides) and about 1/2" wide. The part is printed with 26 4 HV CMC 7. This is an older aluminum window. thank you for your help in loc ... (cont.)

Hello Looking to replace the channel balancer on our windows and need to Identify...please se attached photos and the metal channel lenght is 27" Thanks Leo Johnson

From webpage - I think I may need a 37" series 378 channel balance with option 3640. But, I am not sure that is the right one. Windows are 30 years old, then damaged channel has marks 26.4 KN CALDWELL snf id 1/2 wide (see photo). the one of other side of window has mark 26.3 CALDWELL LM. They appear ... (cont.)

It says 26 3 at the bottom.