Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

Hi, I'm looking to replace my channel balances. Not sure if the letters make a difference. I have a 26 4 KO and 26 4 JO that was in the same window. Not sure if this makes a difference. The sash weighs 23.6 lb

Do we need to purchase 2 for this kitchen window?

28" in length

Balance

As per title. Unsure which series this is. Need 2 of them.

Hi, I am looking for a replacement part for my window. I have attached a picture of the replacement part, the number of the part and, the window manufacturer. Hopefully, this should be good enough to identify the part and provide a replacement part number. Thanks a lot for your assistance. ... (cont.)

Need to replace these sash balances...4 pair of 27" (sash size=40" x 30") and 4 pair of I5" (sash size=18" x 44").

I have a window with a manufacturer sticker on it identifying it as a DH-C40. The spring assemblies on both sides are toast. Attached is the information printed on the spring assembly. Is this enough information to identify a replacement? Please let me know. R/glenn

2630 27"

1/2" wide, 28" long, markings are very faint, my best guess is 26 4 BW CMC 1

Hello! I have several non-tilt windows (same size, on the same wall) with the sash misaligned (non leveled, leaving gap on one side of the window when closed). I watched your Youtube video and tried to take the sash out and replace the window balance. I measured the balance to be 27 inches long, and ... (cont.)

Channel series guides for single hung milgard aluminum windows from 1996. I need 3 sets for my existing windows. This is the only marking on the back of the channel 26 3 JO CALDWEL

Length is 27in also is there sash cam you would recommend to go along with this balance? Old one is missing let me know if you need any additional photos, thank you!

Do you have replacements parts, possibly up to 14 pieces plus instructions how to perform the job.

Hello, the metal bar is 27" thank you

Hello, I believe I have Milgard windows and one of the balance channels is broken. I need to replace it but am not sure where to find this part. It is stamped 26 4 DV CMC 7. Thank you for any help you can provide.

hello, I have a 27" balance spring for Milgard non tilting windows. The rail is 3/4" x 5/8" X 27". It has the numbers 26 4 EX CMC 7 printed on the rail. It is a vertical small window with a rail on each side. I would like to buy two. I don't have the weight of the window but I am hopeing the pri ... (cont.)

Please, let me know the part numbers for these items so I can order them.Thanks,Reza

I'm looking for the window balancer 26 4 JW CMC 7 I used to be able to find them at Home Depot but not anymore. I hope you can help me find them. I'm in need of 4 of them.