Viewing all customer Discussions for:

21-007 Bifold Door Guide Pin

discussions/Bi-fold-mirror-door-77-47053 Can you identify the door? It's a 60" MIRROR bifold 2/ sections of 15" x 15". The track in the floor is the same as the extra parts I received. I need?: 2 top Bifold Door Mounts? 2 top Bifold Pivit Pin 21-0007 2 bottom Bifold Door Bottom Bracket ... (cont.)

I have a set of metal bifold doors. The photo of the complete assembly shows a white plastic item that rides along the track. Unfortunately, one of the caps broke and now the door does not close properly. Any chance you are able to offer a replacement part? Thank you.

I am looking to purchase your 21-105. However all the springs you offer online are either too big or too small the 2 closest ones I was able to see is products 21-151 and 21-156. If you could please offer some insight on which springs would fit best with this pin cap, that would greatly be appreciat ... (cont.)

Need hardware for older weldwood metal doors made by us plywood see pics Thank you..

Hi I have a 3ft metal bifold door and would like to replace the top and bottom track and 4 pins. Based on the attache photos what would you recommend Thanks

Hello, Based on posting/pictures already on your site I have identified the bifold doors in my house as old style Slimfold. But I had some questions about the parts I need. Want to replace all the pins and brackets. Are the pins and brackets on the top same as bottom ? That is the pivot pins, guid ... (cont.)

I ordered 21-402 & 21-150 & 21-108 for a mirrored bifold closet doors. 21-108 does not fit in the track I ordered i talked to one of your reps and they said i need new pins and caps to fit the track she asked me to send pics of the old pins they. can you let me know what all i need to order to fit t ... (cont.)

I am attaching the photos of my metallic closet bi fold door's hardware. Top pivot : refer top pivotphotos 5 inch long, 1/4" dia with a plastic washer or cap to hold the pin top and bottom of frame (on a door- See photo top- 8) And a two metal push nuts with cuts to hold the pin( photo no (1,2 ... (cont.)

Please help ID track pictured. I am being told that the door has Acme listed on it. This track may be discontinued, if so please list a possible replacement. Thank you for your help.

I'm repairing 3 metal bi-fold doors for a friend. I can't tell who the manufacturer is but they appear to be an exact match for the doors in your video. Mounting holes are 5/16". My only problem is that the threads on 21-001 Pivot Assembly are formed and not die cut (like the original assembly) w ... (cont.)

I am a little confused, you show a pin cap 21-108 along with the 21-402 track in many of your suggestions, but you mentioned that this cap will not work with this track. Which track will the 21-108 cap work with? I am replacing all of the pins and tracks on a S376305 door. closet opening is 5 foo ... (cont.)

I have an old bifold I need hardware for. I would need enough hardware for 2 bifold doors both top and bottom hardware.

I am missing the pin that holds the door to the track on the closing side not the pivot side. Please help me identify needed part. Thank you, Patrice

I have Leigh full vu bifold doors model S907213 (5' door) and S995806 (3' door). The track and nylon guide and spring are worn out. Can you recommend the complete replacement set for these doors that were installed in 1972. I have 3' and 5' doors. I have about 60 sets of doors that are wearing out ... (cont.)

Need just the nylon cap. Couldn't find it in the accessories.

I ordered some bifold door parts to repair my closet but they do not fit. For 21-001 The bottom assembly. I believe I can take off the 3/8" cap and replace with a wider cap. Do they all fit universally with the pin or do I need to buy a whole new set and return the 21-001? The 21-154 does not ... (cont.)

I have several Slimfold Model "E" bifold doors that need replacement parts. The specific parts are the pivot pins and plastic caps. The doors should be from around 1985. The pins are 3/16" diameter on the end cap end, 1/4" pin diameter, and 6 3/8" long. What part numbers do I need for replacement? ... (cont.)

Hi-This is a picture of the track I am looking for. It is wide and tall with a groove that is 1/2' wide. I need a length of 36". I would be willing to consider a solution that doesn't use a lower track and an independent mount for the stationary pin as I have the top track that would serve a ... (cont.)

I have metal doors for 4 closets... all needing the required hardware and tracks to reinstall them. I have provided pictures of the doors, along with whatever hardware that remained with them. I do not want to reuse any of the old hardware and want new ones for all 4 closets. I will need all requ ... (cont.)

Attached are photos of the top of the metal bi-fold pivot. I also needs some of the threaded parts for the bottom pivot. At minimum, I need (4) springs, caps, and the best device to hold in the pin. The pin is 5/16 (.310) x 5 1/4" long. I was looking at parts 21-065, 21-001, 21-007, and 21-154? ... (cont.)