Viewing all customer Discussions for:

S390-30 30" Series 390 Channel Balance

Trying to find the part required. The stamp says 2930 but I don't know what caps I have.

Hi. Looking to identify this window balance and possibly order a few

Existing balance is from a Seasonshield sh window. 30 inch length / 1/2 inch channel w/ID # "29 5 IX CMC 7"

I have very old windows (probably almost 50 years old) and need channel balances for them. Attached are photos of the top, the bottom, the hook installed, the back, and the engraved number 2920 BSI FA. The length of the metal part is 30 in and the total length top to bottom is 31in. I need the whole ... (cont.)

Can you help identify? Balance numbers 2920, 3340

Channel balance non-tilt: 28 windows = 56 of ea item MFG by: Seasonall Stamped: 29901 BSI 35; 29.5" long (the actual metal part) balance shoe: 1-1/4"x1-3/16"x1/2" no wings (may be 15-003?) balance top: 1-1/4"x1/2"x1/2" no wings (similar to 19-002 except has round groove) sash guide: 2"x 3/4" 1" to ... (cont.)

I need 30 inch

Window weighs 20 lbs. First picture has markings.

Hi Swisco, These are 30" channel balances (metal only length) Two different brands or channel balances were installed in the same window. Can you recommend a replacement? I saw 349, 350, 380 looked all vaguely similar. Here are some photos that may help:l. Thank you

These were removed from the windows. They are broken but I think you can ascertain the part for purchase as replacement. Wonder why the numbers are different. Window broke due to plastic retainer peice deteriating over the years. Your help is appreciated.

I need to replace a balance rod, it looks to be your 390 series 30" the number stamped on the rod is 2964. Your options are 2960 or 2965 Should I get the 2965?

Nuair brand 30inches..stamped 29D Do you have replacements? Thank you.

The attached photos illustrate the tracks needing replacement. There are numbers on the track..2920 on two sets and 2930 on another.Please give me any advice on what I should order. If additional measurements or photos are needed, please request...Thanks,Don

Please help me to identify this block and tackle balance. It is 30 inches long. Also can you determine by the window picture part what plastic bushing pieces I need for the window itself?

I have included a number of photos. It is a non-tilting window. Old channel has marking of 2790-BSI-OJ-30. It is 29 inches in total length.

Has 2920 stamped

Please let me know what balance I need. It is marked 2920 and it is 30 inches measured by your instruction.

I have 3 windows that I need to replace the channel balance I have removed the channels Each window has 2 channel brand UNIQUE. 1 window weights 10 lb. One channel is Unique 29 -A-16 the other is Unique 29-A-10 the metal length is 30" 1 window weights 15 lb I removed one Chanel marked Uniqu ... (cont.)

I need a replacement balancer for my window that measures 31 inches. I believe the part I need is the 31" Series 380 but I'm not sure which option. Any help would be appreciated. Thanks

The channel is 30 inches long and it has a number on it that does not match any of you part numbers. 2930 is the number. Could you please let me know what part number to order. Thanks