Viewing all customer Discussions for:

21-026B Plain Pin, 1/4" x 5-3/4"

After further investigation, it appears that the top has a metal pin, with the plastic Cap. The top hinge is in good shape. If the lower pin is intact, all I would need to do is to change the plastic Pin Cap. If that is the case, are your experts thinking that the replacement Cap would probably ... (cont.)

I am retired woman and will have a handyman do work if parts are still available. The door is 36 inch wide. There are four of these doors in the home. This one is in disrepair. The actual doors are in good shape. I would like to replace all of the other parts. I believe there also should be some typ ... (cont.)

Need 9 upper & lower guide pins and bushings, 4 top pivot pins and springs if required, and 3 adjustment (lower pivot) pins. See parts drawing photo for nomenclature. I need parts for a home sale asap!

I need two of these rollers for an older sliding patio door. I have looked through the items you stock and I could not find one. I do not know the maker of the doors. I hope you can recognize it or have one that would work. I have attached a picture.The measurements are 1 1/2" long (not including sc ... (cont.)

I recently purchased a house that was built in 1974 and it has the old metal bifold closet doors that 36? and on 72 inch guide top and bottom i need bifold kit for pivot top and bottom

We purchased a house with two sliding glass doors that need new rollers. We don't see any brand name markings on the doors, but the wheel is imprinted on the side with " KILIAN " TORONTO, CAN. SYRACUSE, N.Y. The wheel assembly is held in place with a 15/16 inch spring pin, and the wheel is hel ... (cont.)

I am looking for 4 door wall rollers that match these pics or ones that will work in place of these.

I am trying to locate this guide pin. They are original metal bifold closet doors were installed sometime in the 1970's. the two side grooves broke off the original. Please let me know if you have them and where I can get them. Thank you Debbie

I need both a top and bottom guide post assemblies for a National door which uses your part no. 21-113 guide on my track. Please include springs, clips and installation diagrams. Joseph W.

I am attaching the photos of my metallic closet bi fold door's hardware. Top pivot : refer top pivotphotos 5 inch long, 1/4" dia with a plastic washer or cap to hold the pin top and bottom of frame (on a door- See photo top- 8) And a two metal push nuts with cuts to hold the pin( photo no (1,2 ... (cont.)

We need to purchase complete mounting hardware minus top and bottom track for 10 doors. Doors were manufactured around 1970. Thank you Jim

I need help at getting the right size top and bottom pivots, for my bifold doors. I would also like to get more brackets for the pivots but don't know the right size. And while I'm at it I'm going to get the glide pins replaced.

Here parts I need to repair the doors for my brother in law. First is a photo of a diagram and a bottom pivot pin assembly. I am hoping you can get all the info from the drawing for the parts. I would need. I would like to replace all the parts on the doors if possible. Our tracks appear to be good ... (cont.)

the bottom tracks for my 10"-(four 30")bifold louvered metal closet doors were discarded by my contractor. i want to replace the track with just the bottom pivots and a roll guide. how does the small plastic roll guide 21-174 go on. do you have a ball type of roller that is independent of a bottom t ... (cont.)