Viewing all customer Discussions for:

21-026B Plain Pin, 1/4" x 5-3/4"

Hello, do you have most or all of the hardware to replace all of the part# 4-18? thanks

I have old (1960-70) Strato-fold metal clost doors. I have looked though other posting and beleive I see Two solutions; one for Square hole 5/16" shaft, and one for round hole 1/4" shaft. (It looks like I have the 1/4" round hole) From a July 12, 2023 post I see: 21-003 bottom adjustable threaded pi ... (cont.)

I am looking for the top stationary pin for my bifold doors. The pin could be a 1/4" diameter or less with a hole for a keeper/retainer for a spring.

Hi there, I am helping my friend fix her sliding glass door The center door is the only pieces of glass (there are 3 panels tot) that moves and one of the rollers popped out. Ideally I would like to replace both rollers, use the existing frame and glass, but I cannot figure out how to get the s ... (cont.)

I am trying to fix some metal bifold closet doors, but the attached pins are missing on a couple of doors I need to fix. Will your hinges replace these okay? They are very similar but slightly different. Here are the parts I see: 21-007, 21-001, 21-065, etc

Need to replace broken guides for metal bifold closet doors

Hello, I am looking for replacement parts for my closet bi-fold doors guide pins. The doors are metal These have been left as is since the house was built in the 70s. I do not know the door manufacturer. The pin diameter is 1/4". The nylon cap diameter is 3/8".

Help! I love my steel doors but various parts, like the bottom pivot bracket, are breaking or missing. I need help finding ALL parts for these doors as a lot of parts are missing for them to be operational. I have included pictures of the parts that I have. I don't need the track or hinges. Hopefull ... (cont.)

I have 3 sets of floor to ceiling metal bi-fold doors and need replacement parts. Please view the images. There are no markings on the doors.

I need the doors parts too and bottom to smooth open and close

I have missing parts to Strato Fold doors and need 4 guide pins, slide bushings, springs and any retaining items to make these stay in place. Probably from 1970s. Thank you.

Hello Loren and Swisco Help Center, Could you please help me with getting the following hardware: Qty 1 Kitchen window lock for slider window Qty 4 Bedroom window lock for slider window Qty 1 Set of all hardware (excluding door handle) for Kitchen Closet for left door when looking at front of cl ... (cont.)

Give me a Quote for 10 GUIDE PINS (5 1/4" x 1/4") and 2 Pivot Pins ( 5 1/4" x 1/4") ASAP. Thank you, Bobby

To whom it may concern: I am interested to buy the spare parts for a Strato Folding cabinet with serial # 38260. I need the kit following: BM-1 - track block BM-2 - Bumper BM-4 - Upper pivot pin BM-5 - Spring BM-6 - retaining ring BM-7 - retainer BM-8 - retainer screw BM- 9 - Upper and lower guide p ... (cont.)

I need to restore a total of 4 doors. Need all hardware: Guide Pins, Pivot Pins, Pivot brackets etc. Door manufacturer unknown. Help.

Hello, I have 8 metal bifold doors that are needed to change with the new set of hardware in order to open/close them easily & securely. I am looking for your help for identifying all needed parts of the hardware. There is a tack of the sliding door on the top, and another track on the floor. I ... (cont.)

We have 3 bi fold doors that need repair and one double bifold door that needs repair.They all need new stationary pins, plus the pins with the springs. the double bifold door keeps opening off the track, not sure if it piece that runs across the track is too short.Do we need two pins for each stati ... (cont.)

Hi! Wasn't sure, I just couldn't find this size on your site so wanted to ask for help! This is for a mobile home bifold door system. Any help would be greatly appreciated! Thank you, Liz

I am renovating my place and decided to spray paint my old closet doors, unfortunately once I removed the doors the top pivots came off and the little plastic plugs are no longer keep them from springing out. I will need to order new top pivots and bottom pivots along with additional stationary pivo ... (cont.)

STRATO-TRACK INC. is stamped on horizontal bracing. Tracks are fine.