Viewing all customer Discussions for:

21-033 Float-A-Way Bi-fold Door Bottom Guide Pin

I need a few parts for my metal bifold door.I need a track that measures 29-1/2"long or a 36" pc. I also need the bracket that the bottom pin slides into that mounts to the jamb or floor and the top guide and pivot pin..If you need any more information please let me know? Thanks

Dear Paul: My Float away bi-fold doors are still in working condition. However I have a hallway closet which is an issue every time we open. I need the entire bottom pin assembly on the side which slides through the channel.Thank youDave

Trying to match the pin in the attached photo. Please let me know if you can help.

I am trying to locate the pin set top and bottom for the 70 steel door. The door is 17.75 per side. 35.5 overall. The pins on one side screw into the door. The top side appears to be a spring loaded and around 6 inches in length. I have the bottom two and one top. Here are some images of the top. ... (cont.)

I need the rods for top and bottom for all 4 points of the door. These are very old And the closet is not lined up correctly. SO hoping that new parts will make the door work smoother. I have a few more pics. But could not upload due to max pics reached.

2 pics of the same pivot pin. 5.25" tall, 1/4" diameter. Several of these pins appear to be missing the bushings and retaining clips. I could really use some help to identify this pin and I'll need several bushings and retaining clips. Thank you! Lee S

The pins measure one quarter inch in diameter, the plastic that fits the ends measures 3/8 of an inch . the sticker on one of the doors says FLOAT AWAY DOOR COMPANY of Georgia . I need top to bottom hardware.. four per door, four top , four bottom , eight per set of doors, two sets of doors eight b ... (cont.)

Do they still make sliding bifold doors for closets with bottom tracks? We need to replace old metal ones, and the carpet has been cut around the old track. The only kind we can find only have a track at the top

I am looking to replace one of the bottom pins of a very old metal bifold door. The marking on the inside of the door says 1968 with the company name Float-Away Door Company. I could not find any markings or numbers on the existing pin.

Hi There,I have 16 door at my townhouse built in 1978, come with this Bifold door metal, but now no longer works, I need to replace it. Could you please help to check if you have this Bifold door metal available or not? Thank you, Linda

I'm looking for a replacement pin for my house closet doors. Its the bottom pin the closets are about 50 years old or older

Closet door came off track Hardware that holds door in place at the top of fixed side seems to missing a piece Does not have a spring action to hold in place Have taken door and hardware to various stores and no one has this older hardware

Here are pictures of the doors. Do you have replacements and can I get them in Chicago or only online. Thanks Gisele

Hi, my name is Maddy. I have a few metal doors that need new hardware but I'm not sure which one are the right ones and local hardware store does not not carry. can you please advise me on what I will need to make this doors work like new? I will appreciate your help on me placing an order to find w ... (cont.)

I need to identify which pin is most fit my case. It is top pin in the middle of two sash. I won't to remove such old one. sometime it will not be back if removed. So I have to show you the picture. The door is made 60's but the pin might already not original. I tried some pin on market but ... (cont.)

I can't find and markings on my four closet doors or the hardware. Can you identify these?

I am looking for these. 55 year old bi fold metal doors. Slides in a wood top track.

I had great success with one closet's bifold doors, and I thought the other door was identical. But it turns out it's really different. Do you know which parts I need?

Not sure what this part is but it is like a 5 1/2 inch pin for a metal bi fold door

What are dimensions of the pin?