Viewing all customer Discussions for:

21-104 Bifold Door Pin Cap, Float-A-Way

Metal bifold door top pin 4 inches long with spring.

These are pins for folding closet doors. The only marking I can find on the doors is that they were manufactured by Float-away Door Co., a division of Kinkead Industries, Inc., in Atlanta, GA. The house was built in 1971 so the manufacturing date would likely be 1970-1971.

Looking for help to identify a part for bifold doors from the late 70's. Pictured are one that works and one that doesn't. The only difference is the worn cap. Thanks.

Hello Do you have replacement hardware for this bifold door? It's super old, date on back says 1971. Neither door set had a complete set of hardware on it. They're in an old mobile home. Hoping you could help with the upper and lower pin replacements. Also not sure the tracks have the pieces they'r ... (cont.)

Looking for this parts. Thank you for you help

I need new nylon bushings for 16 doors. Not sure if caps are a 21-104 pin cap. Can you please advise me. Thanks Jeff

Metal pins are fine but need grommets with inner hole diameter 5/16" and bushing inside diameter 5/16" and pin cap 3/16" inside diameter and come spring 2" high , 5/16" and 3/4" diameter. I will send additional photos to make sure parts will fit. Also are there any videos on best way to insert long ... (cont.)

Hello - I'm in need of replacement parts for a Take-A-Way brand metal bi-fold closet door. The manufacture date says 1969 if that helps, the parts appear to be original. I measured both bottom pins at 5-6/8th inches long, top pins at 4-6/8th inches long. Diameter of the tip of the top and bottom ... (cont.)

HiNeed to replace the lost pin for the closet door For my mother in Florida as soon as possibleI need this in a rush Thank you very much

I am looking for hardware for metal bi-fold doors. Doors were manufactured by Float Away door company Atlanta, GA in 1960's. I have attached the above photos for your review. We would appreciate your quick response.

I need a few parts for my metal bifold door.I need a track that measures 29-1/2"long or a 36" pc. I also need the bracket that the bottom pin slides into that mounts to the jamb or floor and the top guide and pivot pin..If you need any more information please let me know? Thanks

I need the rods for top and bottom for all 4 points of the door. These are very old And the closet is not lined up correctly. SO hoping that new parts will make the door work smoother. I have a few more pics. But could not upload due to max pics reached.

Can you please tell me if you have this pin? Its for a metal bifold closet door. Thanks

This is a picture of the pin on the top of my metal bifold closet door.

I have some hardware I'd like to identify. I labeled the files as best as I could. A couple of the detail pics are just for identification.

Closet door came off track Hardware that holds door in place at the top of fixed side seems to missing a piece Does not have a spring action to hold in place Have taken door and hardware to various stores and no one has this older hardware

Hi, my name is Maddy. I have a few metal doors that need new hardware but I'm not sure which one are the right ones and local hardware store does not not carry. can you please advise me on what I will need to make this doors work like new? I will appreciate your help on me placing an order to find w ... (cont.)

I need a replacement track because the original wood track was destroyed during a renovation. The opening is 36 1/4 inches wide, with a pair of metal bifold doors that install in the opening. The doors appear to be original to the house, which was built in 1961. Each bifold door is 17 3/8 wide X ... (cont.)