Viewing all customer Discussions for:

21-150 1/4" Nylinder

Hi, We are looking to replace hardware for our metal mirrored bifold closet door 3' opening. Attached is a photo of some of the hardware pin & slide. The door has to tracks top & bottom and was installed in the 1980's. Thank you. Rodger & Ivy

Hello, My folding doors fell off, and the repair man said I did not have the correct hardware needed to fix them. Can you identify the hardware I would need for two of these doors? Thank you. Steven

I have 3 sets of floor to ceiling metal bi-fold doors and need replacement parts. Please view the images. There are no markings on the doors.

Hi, Do you have any suggestions for a new track & pin system to work with existing Leigh bifold doors? My neighbors keep getting rid of their doors and not putting out the tracks with them! I painted one set and had something that kinda worked, but with limited bottom supports and the disk tops a ... (cont.)

So none of the parts I've ordered for my customers doors have worked. Both times the top guide pin hasn't worked they aren't fitting inside the track and the guide pin is spring loaded so it needs something to hold into.I don't have any photos of the original hardware. I don't have the old parts the ... (cont.)

I need the doors parts too and bottom to smooth open and close

Can you help me find parts?

plastic guide runners are broken on top track and bottom track, do you carry?

I am looking for a hardware kit or Pins, springs, caps to repair my 1970's FULL VU Bifold closet doors...Please excuse the dirt & dust! The tracks are completely fine but I need all hardware to repair/completely reinstall the bifold closet doors onto the existing tracks. I don't even know what ... (cont.)

I Need another metal post and the plactic tips. I just do not know what size will replace it. I also need 2 new spring post to click them into the top. This is for an 66 years old garage furnace closet. The doors are nolonger bifold, they where fused together so they only swing out pivot like a ... (cont.)

Looking for this assembly item number, if it is unavailable, the item numbers for the individual parts. There are no makers marks anywhere on the doors or the hardware for them. Thank you!

No markings on any of the parts, unknown maker of the metal bi-fold door. Removed pin not knowing pics needed before removal. Pin in pics is 5 1/4" long x 1/4" diameter. Spring and cotter pin were on it. Plastic gasket in bottom and top of door holes (may be nylinders?) No plastic cap on top of ... (cont.)

Hi, sorry I don't have better pucs at the moment. I was hoping you might be able to ID the door from these lower guide pin pics and provide a parts list for all the hardware. Or maybe point me in the right direction for how to ID them, I couldn't find a brand or anything. My parents and several of ... (cont.)

I have missing parts to Strato Fold doors and need 4 guide pins, slide bushings, springs and any retaining items to make these stay in place. Probably from 1970s. Thank you.

Hello Loren and Swisco Help Center, Could you please help me with getting the following hardware: Qty 1 Kitchen window lock for slider window Qty 4 Bedroom window lock for slider window Qty 1 Set of all hardware (excluding door handle) for Kitchen Closet for left door when looking at front of cl ... (cont.)

Looks like the piece the holds the rod in place is missing.

I was considering replacing my clunky pin assembly as you recommend but the hole for the clamp is not square. Is that a problem? Also, the pivot clamp needs replacing but I don't see an exact match. Photos attached. Thanks!

Give me a Quote for 10 GUIDE PINS (5 1/4" x 1/4") and 2 Pivot Pins ( 5 1/4" x 1/4") ASAP. Thank you, Bobby

I need to restore a total of 4 doors. Need all hardware: Guide Pins, Pivot Pins, Pivot brackets etc. Door manufacturer unknown. Help.

Top and bottom track. These are pics of pin and spring