Viewing all customer Discussions for:

21-203 Pivot Bracket, Float-Away

This part is to hold the old model metal closet bifold doors in the bottom rail track

I have an old metal bifold door from the 70's...i need all the parts to fet the door to open close easily. Top and bottom parts

I live in Florida, do you deliver?

I need to find replacement hardware

Float away mirrored bifold doors upper and lower guides

Left door, inside top pivot pin. Also need the guide in the top rail.

Manufactured home with a closet wall made of mirror with two door on each end. Pivot mounts in a tract top and bottom. Pivot is used to hold the large mirror in the middle also.

Hi I am working on a metal bifold door I am not too familiar with these types of spring loaded metal bifold doors need help picking the right hardware for this door haven't seen anything on video about fixing the store could I send a photo to you so you could recommend how to repair this door. The o ... (cont.)

I have some bifold metal doors that I need to get new slider pins for the track. The one that came with the door have a 7/16" top. I need pins that will fit into the track I already have which is a 1/4" slot. Would the 21-024 work for me? The photo us what I currently have. Can I just change the to ... (cont.)

Nylon top block that goes in the rail. That excepts the pin from the bifold door!

Hi, I submitted an inquiry about 15 minutes ago and then realized I should have included more information. I'm missing the upper and lower pins from bi-fold doors manufactured by Kinkead Industries. The brand is Float-A-Way. The doors are 65" width, 78.5 height. Do you have anything that would work ... (cont.)

I need a few parts for my metal bifold door.I need a track that measures 29-1/2"long or a 36" pc. I also need the bracket that the bottom pin slides into that mounts to the jamb or floor and the top guide and pivot pin..If you need any more information please let me know? Thanks

I ordered some parts from swisco recently and now I need a couple more but I'm having trouble finding what I'm looking for on your website. Parts I had ordered were 21-044 and 21-250 and 21-100.

Hello I would like to order new pin-assy's for my bifold closet doors and I know that in a glance you can tell which ones will work. I will count the quantity and order them once I hear back from you . See attached pics of my doors. Thank you

Looks like I need for of the pins that help to hold the door on and the bottom track. The opening is 48" long. The track is 3/4" wide and 3/4" deep. The pins that hold the door on the top are approx 5 1/4" (plus the nub that is in the track) and the bottom pins are approx 6" (plus the nub). So, ... (cont.)

I need new 2 top and 2 bottom pivot brackets for my doors. I also need 2 top and 2 bottom pivot pins that will fit the brackets. I prefer not to remove the track but can if necessary. No manufacturer but cardboard glued to inside bottom of doors and one caution arrow. Please advise. Thanks ... (cont.)

Hi. I'm looking for a replacement pin for an older metal bifold door. The attached picture is the pin that is broken and keeps getting stuck in the channel. The pin length is 5", cap is 3/8" diameter, pin seems to be 1/4" diameter. Thank you for any help you can provide.

A screw was lost for a folding door track. The round head of the flat head screw is 1.5 cm in diameter, the blunt ended shaft is 1.3 cm, and the shaft is .5 cm in diameter with metal screw threads. Do you have anything that would fit?

I can't find and markings on my four closet doors or the hardware. Can you identify these?

Hi, What are the part numbers needed for the top and bottom pivots for steel bifold doors?