Viewing all customer Discussions for:

21-403 Bifold Track, 6' Opening

I would like to buy 2 tracks for my Benchmark Steel bifold door. also I need to confirm that I need the following one of 21-0002 pivot pin 3 of 21-004 guide pins thanks huda

Please let me know which patr number is match to in my picture 1 part i found in your part picture your part number is 21-007 match with my part onather 2 part please let me know your part number This is three pieces 1. Top 2. botam. & in middle part is base sockets.

I need tracks for 102" opening and two 60" openings.

I need replacement pins, which part would I need? The pins it has now are 5 1/4 in long and 5/16 in diameter. Also if I decided I wanted to replace the tracks which type would I need for the top and bottom?

Hi, Thank you for your quick response. The pin that I have is 6.5" long but the width is correct 1/4"with a 3/8" nylon cap. Please let me know if you have the size I need. Thank you.

Hi am having trouble finding the hardware and track for my old metal bi fold doors. Do you have hardware kits available? I still have to top track but I'm missing the lower.

Need to find floor track and top pin for 3 bifold doors

I have no experience with this kind of door but I am handy and have been doing some research. I'm pretty sure I can figure it out with the correct parts. I have many more pictures if you need clarity , including pictures of a working door with parts intact. These doors have been a nightmare but my ... (cont.)

Plastic sliders compromised, do not hold on to Inside pins where the two doors close.

I'm looking for a bottom track for a bifold metal mirrored closet door. I recently got the guide pin 21-007. This is the track that goes into. The pin fits the door perfect but it rubs on the sides of track. Thank you.

My name is Roy, I have 12 old metal bifold doors that needs new guide pins, springs on the top and bottom. Here is the door that I need part for please lmk thank you These doors are about 50 years old and all needing replacement. Thank You Roy

Looking for replacement hardware and diagrams for 1960s steel bifold closet doors

Please contact me regarding replacement parts

Can you sell me this pin?

I think I've identified the parts I need. They are: 1. the stopper with the screw that prevents the top axis pin from sliding. 2. The two plastic rollers that go on the top sliding pin. The width of the track sliding slot is 04" or 10.3 mm The diameter of the top sliding pin is 0.18" or 4.6mm My on ... (cont.)

Hello, I have some old metal bifold doors. I'm looking for everything in the picture and the doors look pretty much like this. But I mostly need the stuff for the top. Everything basically including the plastic piece that goes into the track that sits on the pin.

Hi, I have seven metal, louvered bifold doors (circa 1970). I'm having doors powder-coated, and I would like to order new caps for (I'm unsure of proper nomenclature so I'm calling them) pivot-pins and slide-pins. I hope that you may provide assistance in identifying the correct replacement parts ... (cont.)

Here are some pictures of my older bifold doors, if you can identify them, I need a list of the two top and two bottom pins I guess? Anyway, feel free to reach out thank you guys.

I need those pins and brackets for metal bi-gold door

Have a lot of pins and grommets needed to fix 10 closet doors