Viewing all customer Discussions for:

21-403 Bifold Track, 6' Opening

I need replacement floor tracks for my 1969 fold away bifold metal closet doors - still available? Do you sell a kit to refurbish the door and all the hardware?

Please, I am seeking assistance with completing the hardware for 6 x 24" bifold panel for 3 x 48" closet. I picked up these used doors from a yard sale and would like to install them. I am primarily missing the 3x upper tracks and 6 x pivot/jam bracket (and associated pins). Some of the hardware in ... (cont.)

Hi, I have 5 pairs of bifold metal closet doors in my 1972 house that I would like to spruce up. The tracts for the sets are 71" , 59" , and 47" (x3) in length. I'm wondering: (1) do you carry replacement tracts of this style and in these lengths, or something similar? (2) do you carry replacemen ... (cont.)

I sent an email inquiry earlier this morning. Attached are two photos that I took of the top and bottom ends of the bi-fold door set, without the hardware in place. Can you discern whether your hardware will fit on these doors, please? I would much prefer to make these doors work, rather than buyin ... (cont.)

Hi, I have three 1970s metal bifold closet doors that I'm hoping to find replacement parts for. I removed the doors to have my floors replaced and many of the parts have been broken or misplaced. I'm hoping to find replacement pins, brackets, clamps, bumpers, tracks, and anything else needed to com ... (cont.)

Hi experts: Need to replace top and bottom tracks for bifold on 2 closets. One set is 71" and the other set is 60" Thanks for your help!

I am looking to replace the tracks, pins, and all other hardware for all the closet doors in the house my wife and I just purchased. The house was built in 1958 and has the original closet doors, and we expect the original mechanisms. I have had a really hard time identifying and finding the parts t ... (cont.)

I'm trying to replace bottom track. The doors do not even use the track, they float above it. But I need the exact replacement because of the carpeting. If I replace with a skinnier track, the carpeting will not be snug against the track and you'll see the floor below. I bought the Swisco 6' track ... (cont.)

Can you please identify the top pin assembly for our closet doors?

Looking to replace the hardware and tracks to the bifold doors at our new house. All of the tags are worn out so I can't find any information. Any help would be great. Thanks!

I need four to six sets of double bifold door hardware for approx. 1970's Float Away budget bifold doors.

Greetings.. I have two metal bifold doors that are hurting.. the start of the issue is that the wood tracks are fully worn and the pins will not slide. Yes wood, there was no metal in the track. House built in the 70's. Both are 6" wide, 7' 4" tall. Half of the hardware is swapped out for simple bol ... (cont.)

We have two closets with metal bifold doors and I am THRILLED to finally be able to fix them. I need new tracks and new pins all around. Attached is a photo of the top pin on one door. Can you help me figure out what I need? Thank you!

I have three metal bifold doors that I would like to reinstall. One door goes in a 36" wide opening and two go into a 72" wide opening. I am looking to purchase the upper tracks and associated pivot mounts, and the lower floor mounted brackets. I do not believe that there was a lower track. If ... (cont.)

I recently purchased a rebuild kit for ~1980s mirrored closet doors. I cannot get the pins to stay in the pin caps as the pins pull out when opening/closing the doors. I reversed the spring tension on the doors(top: push up vs pull down to engage pin) and the pins still will not seat in the cap. ... (cont.)

Dear Sir,We are doing renovation on multiple apartments with older metal bi-fold doors. The hardware for most of the doors needs to be replaced. I have attached pictures of one set of doors and the existing hardware. I do realize that most of the nylon bushings are missing and the pin in picture #14 ... (cont.)

Hi, I'm looking into restoring these old metal bi-fold closet doors. I was wondering if you had all the hardware needed including the rails. I'll upload some photos.

Bifold mirror doors these are the 2 openings. Are new tracks are available for these doors? We're switching to white marble tile floors and we want to, if possible, embed the the track into the floor. Two openings:72W x 80H 60W x 80hAfter measuring our pins the adjustable threaded anchor pin is a 5/ ... (cont.)

36" 1 72" 3

These are metal bi-fold doors. I've used in the past parts I got at Lowe's, but, they don't last, they are not the proper parts. The pins are 1/4" and the piece of plastic that rides in the track is 3/8". Can you help?