Viewing all customer Discussions for:

21-403 Bifold Track, 6' Opening

Metal bifold doors 36" wide by 93" high. Need new track and hardware. I can give more detailed information if you need it.

Hi I have a few older metal bifold doors that were installed with the pins and a track on the top and bottom. I'd like to reinstall them with new pins and new track on the top only and use a corner jamb if possible. What parts would replace what I have? The holes in the doors for the pins are 5/16"T ... (cont.)

I was told by one of your staff several months ago that I have a set of Leigh doors, and I got some parts to help fix it. However, after trying to get them working, I now realize that the upper and lower tracks are shot - really nicked up so the door pin caps don't move easily and they keep coming o ... (cont.)

Hello I am in the process of remodeling my home and have 6 of these old closet doors. The doors are in great shape but the tracks and hardware are completely worn out. Do you sell replacement parts? Would be dissapointed to get rid of these doors. They are solid. Just old lol

Looks like I need for of the pins that help to hold the door on and the bottom track. The opening is 48" long. The track is 3/4" wide and 3/4" deep. The pins that hold the door on the top are approx 5 1/4" (plus the nub that is in the track) and the bottom pins are approx 6" (plus the nub). So, ... (cont.)

4 doors that are 18" each for 6' total closet opening I need the plastic tips on the pins (note that the threaded pin has a smaller dia than the other 3 pins where the tip is installed). I also need the track for the top and the mounting brackets (or track) for the bottom of the door and any addit ... (cont.)

I am in need of some parts for half of a 1960's era bi-fold metal door. The track is 3' long !1/16 x 3/8. Not opposed to using the 5/8 track you have if it works based on these pin. Looks like I need replacement pins as well. Thank you for any information. Bruce

I'm replacing my hollow wood bi-fold doors with metal bifold doors. I looked at the replacement hardware I would need from your thread with similar metal bifold doors. My question is, will I also need to replace my track, or can I purchase a wheel cap that will work with my existing track? Here are ... (cont.)

I'm not able to tell what track I should purchase for my metal bi-fold doors. My doors are from the early to mid 70's. Our whole house has them but the one in the family room was replaced with wooden 6 panels (junk). The previous owner left the old doors in the basement thankfully. I am able to fin ... (cont.)

Hello - we are looking for a replacement of the bottom left track for the pictured closet doors. Is the part still available and can one of the two pieces needed be purchased to replace the broken piece.

Hi. Bought the home . No clue of manufacturer or when they were put in. No one seems to know 1. How to replace or 2. Where to get the parts. Gosh, I hope you can help! There are a bunch of these in the house so I assume will happen again. (The top one had a plastic cap.) Pix below. Thank you for you ... (cont.)

I am looking for a bottom track for a 30" x 72" Stanley bifold mirror closet door. Photo P3140418 is the bottom track, Photo P314017 is the bottom pin close up. Photo P314016 is the center. Photo 3140413 is the label.

I have a Slimfold, 60 inch, 4 panel metal bi-fold door which needs a new lower track. The old track is 11/16" wide and 11/16" high.

I need the top tracks and pins for the bi-fold doors in the pictures below,are these available? This house was built in 1957 and these are the original floor to ceiling closet doors

Hi friends,We are facing difficult times with our metal doors in two of our buildings. We are a non profit housing organization called MTR - More Than a Roof Housing Society and we wanna replace our tracks and pins (not the metal doors) by new ones, probably different ones... Today we use parts like ... (cont.)

Hi, we have a mirrored bifold door that is about 6'6" high x 5' wide. I am guessing it weighs 50 lbs. In the midst of a remodel, it appears that I have lost the lower pivot pin bracket. I am attaching a picture of the pivot pin to give you an idea of the system I need. It has a 5/16" thread and a ny ... (cont.)

Bifold doors. Pivot pin for benchmark bifold doors

HI, METAL BI-BOLD DOOR 24W BY 80H NEEDS ALL NEW HARDWARE TRACKS, SCREWS, ROLLERS, SPRINGS, AND PINS for both TOP and BOTTOM of door. Old style metal bi-fold with tracks on 80 3/4" closet header and floor. I need pins, rollers, springs, stoppers, and tracks for the upper and lower. You he ... (cont.)

Hi, I'm trying to re-use old bi-fold metal louvered closet doors after a renovation where the workmen damaged the bottom tracks removing the doors. The pictures I've sent are of the label from inside one of the closet doors and 2 views (both sides) of one of the bottom tracks. I need tracks for ... (cont.)

I have bifold doors that are badly in need of replacement parts. The doors do not stay on the track and are very difficult to open and close. I have attached pictures of the doors with the hardware exposed. These are model E doors.