Viewing all customer Discussions for:

26-337 Top Tilt Latch Pair, 2", 13/16"

Looking for this part that goes on a Single hung Window. It goes on both sides of the Vent Panel. One at the corner of each side as you can see in the pictures. If you can help me please. Thank you.

Hello, I am seeking two pairs of vinyl window triggers per attached photos. Thank you.

The latch broke this morning when we opened the window for cleaning. The entire part is 4" from end to tip of catch. The screw holes are 2 inches apart

Do you have this size 3 1/16 x 1 1/2

I don't have any pictures of them removed. I'm looking for both the catches and lock.

Hello, I couldn't find any exact replacements on the website. 3" long x 1 1/8" wide x 5/16" thick, 2" center to center screw spacing. New construction windows from 1998. Home is in Barnegat, NJ Any recommendations? Thanks, Chris

Hello I need help with a replacement tilt latch to replace the one that is currently broken. The color is an almond/beige and it is a left hand latch. Can you please recommend me the correct part?

The one part sit on top of the tilt windows and makes a right seal. . The other part prevents the window from opening too wide. This part is dry rot

need new one to replace broken one as shown in first picture

The first and last picture is the tilt sash latch, the 2nd and 3rd is the leg that goes into the shoe located at the bottom of the operable window sash.

I need one of these

Hello Swisco, I am looking to match up a tilting window lock. I attached some pictures and dimensions. I believe I have most dimensions needed: Width: 1.041" measured Length: 3.041" measured measured Depth: 0.330" Centers between screws: 2" The window sticker says Republican by Centex Pleas ... (cont.)

Dear I am looking for this part I would appreciate if you can tell me if you do have this part Thank Carlo

I don't see any name, numbers, or markings on the latch. This latch is different in terms of that there is a screw gap for the screw holding the corner together.

Do you have these latch replacement parts? Thanks!

Just need about 10 right side and 10 left side

tilt window latch 2 1/16 x 1 1/16 x 5/16 with lock and 1/8 shank screw holes 2" OC 3/4" from latch end

Please provide the part number for the above captioned sash locks. We need one right and one left.I have attached front and back pictures along with measurements.

i am in need of several tilt latches for general aluminum double pane windows. I cannot seem to find a suitable replacement part. Any help in this matter is greatly appreciated. Thanks, keith

White vinyl / Single hung for tilting inward / Surface mounted / Spring loadedScrew holes: 2" spacing from center of screw to center of screwBase Length: 2+7/8" Base Width: 7/8" Center of hole (closest to end with latch) to end of base:: 5/8"Pair: right and left neededThank you... ... (cont.)