Viewing all customer Discussions for:

26-337 Top Tilt Latch Pair, 2", 13/16"

Hi there! Any way you can guide me to the exact parts I need? I can't tell if they're a red or yellow rod. The window latches are 1x3" with a distance of two inches between the screws. Thank you!Ben

Hi--I recently purchased a house and almost all the window tilt latches are broken due to the sun here in the southwest. The #26-410 is closest in measurement to my old latches. The only difference is the depth. My old latches are 1-1/2" deep and the #26-410 are only 13/16" deep. Do you think th ... (cont.)

We broke a latch that keeps our single hung window in place but allows us to flip the window down to clean the outside. Administrator windows. Do you have any of these?

Seeking right replacement (color doesn't matter). pic with ruler looks off in image, but sides are beveled and edge to edge it's 2 3/4"; screw holes are 2" apart. Thank you

Metal part that attaches to casement is broken.

Circa 2002 better-built tilt window, rectangle part approximately 2 3/4 inch x 1 1/4 inch. Marking says "RAISE SASH 2" MINIMUM TO TILT" - "TILT" written diagonally. Thank you!!!

Have several of these that have broken. Most suppliers are either too long between mount holes, or the body and wedge are too wide for the window and frame to engage. Measurements are 3" long x 1.125" wide, 2" hole center, 25/32" set back, and the wedge is about 5/8" wide.

Please see the attached photo of tilt latch, it is possibly for a Comfort View Window. Screw hole dimensions are 2", length is approx 2-7/8" width is approx 13/16" Please let me know if you have a match. Thank you

Tilt latch is 3" long 1 inch wide with 2 screw holes to attach. Lock is 3 7/8 " long and base is 3/4 "wide with 2 screw holes lock mechanism extends 3/8 into lock. Finger pulls are 2 7/8" long and 1 " wide with 2 screw holes.

2 5/8L1 1/4WHoles are 1 7/8 a partColor is called driftwood (sage green)What would be the proper replacement. Windows are aluminum. Thank you,John

The part that locks the lower part of the window into the track has been broken... on both sides. The wind blew the window in, breaking the locks

need help finding this left and right

I'm looking for them replacement parts,can you help identify these parts

I am looking for this part. The one I bought did nothing fit. Can you identify this? I need a cream color. Thanks. 3'x 1'

need the top latch mechanisms that lock to the tensioner that allow it to stay in place and activating it tilts window down and the bottom spring loaded pointed latch underneath the window that attachs to the insert inside the track that hold window in place, I tried to send pics but red button ... (cont.)

Trying to fine the right one

Looking for replacement of broken latch almond in color, will buy pair.Has 3 and R on under side.

White Plastic Surface Mounted Tilt Latches for Atrium Windows Series 8100 circa 2008 and earlier with the surface mounted tilt latches. What is the closest match you have to the dimensions on attached picture. I need 40 Left Hand and 40 Right Hand Latches.

I have US Window factory replacement windows from 2003 they are out of business now. There are 2 possibilities for replacement latches hoping you can narrow it down for me.

I have several of these that need to be replaced on the windows in my home. I did not see any in the 3-in size. Am I measuring these incorrectly? Thank you for your assistance! Matthew