Viewing all customer Discussions for:

26-337 Top Tilt Latch Pair, 2", 13/16"

Trying to fine the right one

Looking for replacement of broken latch almond in color, will buy pair.Has 3 and R on under side.

White Plastic Surface Mounted Tilt Latches for Atrium Windows Series 8100 circa 2008 and earlier with the surface mounted tilt latches. What is the closest match you have to the dimensions on attached picture. I need 40 Left Hand and 40 Right Hand Latches.

I have US Window factory replacement windows from 2003 they are out of business now. There are 2 possibilities for replacement latches hoping you can narrow it down for me.

I have several of these that need to be replaced on the windows in my home. I did not see any in the 3-in size. Am I measuring these incorrectly? Thank you for your assistance! Matthew

Latch tilts sash of patriot window First picture shows what's left in the window frame after it breaks Second picture is the piece that broke My piece is not white more of an almond color I need two one for right and one for left sides of window

I can't seem to find an exact match. This is from a General Aluminum window. It's one inch tall. The hole is approximately 3/4" from the bottom. There are no markings/part number on the piece.

Hello. House in subdiv circa 1997. All windows only bottom section opens. One window doesn't budge without great force. See img 1437 example of working window and img 1508 missing part. Don't understand how situation came to be re prior owners, but want to install missing piece on both sides of trac ... (cont.)

Window clip

Looks just like your 26-439, but only 2.00" on centers (and no lock/latch)

Please see the attached photos of a window sash tilt latch. This part is beige \ almond colored. The part # on it is L 525 It also says 523, however, the 3 is stamped backwards. The specs are: 1 1\16" wide 3" long 5\16" tall 2 1\16" center hole distance 3\4" from front of latch to 1st center of ... (cont.)

Hi, I need your help again. The house I moved into needs some latches. They are 3"x 1"x 1/4" with 2" between screws. Thank youSue

Need help identifying these window latches tried latches from Home Depot but did not fit

Looking for replacement lift handles, stops and the plastic base located at the bottom of the spiral sash. window attaches to the plastic base to facilitate the tilting operation.

Window is NAMI code A-162-1 series 385 DH-R30 MST 3860. I need a pivot bar I have the screw and case. Which one would I buy?

These photos may not be the best! Could not find numbers or names or markings. These parts are what help the window go up and down. the strings & the metal cylinders are no longer tight. If you can not make out the items in these photos I will try to get a different angle

Need a tilt latch for a window that was manufactured by general aluminum about 20 years ago. It?s 3 1/2 inches long and 1 1/8 inches wide. Screw holes are 2 inches apart.

I looked on your website but can't find it I need 3 pairs I placed an order earlier and wondering if I can add this order to the the one I already placed

There are no markings on this at all. Looking for both a right and left hand latches. Window is approx 18 years old. Dimensions are. 3.5" long. 1 1/8 " wide with a 2" center for the screws.

I found parts that were close but I need help thank youScott