Viewing all customer Discussions for:

26-344 Top Tilt Latch Pair, 2", 3/4"

I'm looking for them replacement parts,can you help identify these parts

I am looking for this part. The one I bought did nothing fit. Can you identify this? I need a cream color. Thanks. 3'x 1'

Trying to fine the right one

Looking for replacement of broken latch almond in color, will buy pair.Has 3 and R on under side.

White Plastic Surface Mounted Tilt Latches for Atrium Windows Series 8100 circa 2008 and earlier with the surface mounted tilt latches. What is the closest match you have to the dimensions on attached picture. I need 40 Left Hand and 40 Right Hand Latches.

I have US Window factory replacement windows from 2003 they are out of business now. There are 2 possibilities for replacement latches hoping you can narrow it down for me.

Hi, I've attached a drawing of the broken windows latch. It would be great if you could help me identify the replacement part - for both the left and right side. Thanks, Ben

All information is included in the photos

Latch tilts sash of patriot window First picture shows what's left in the window frame after it breaks Second picture is the piece that broke My piece is not white more of an almond color I need two one for right and one for left sides of window

There are no markings on them. I need to replace them but am having a hard time finding a replacement. They are 3" long with the latch busted off and 1" wide.

Looks just like your 26-439, but only 2.00" on centers (and no lock/latch)

Please see the attached photos of a window sash tilt latch. This part is beige \ almond colored. The part # on it is L 525 It also says 523, however, the 3 is stamped backwards. The specs are: 1 1\16" wide 3" long 5\16" tall 2 1\16" center hole distance 3\4" from front of latch to 1st center of ... (cont.)

I need spiral balance for 4tilt windows 37" black tipAlso pivot Shoe for 4windows 15-047?3" pivot bars 26-040?Top tilt latch for 4windows 1"x3" 2" center 26-344And a tool 75-033 I don't know if I chose the right parts parts the latches have to be brown or black . What say you?The balance number is S ... (cont.)

Hi, I need your help again. The house I moved into needs some latches. They are 3"x 1"x 1/4" with 2" between screws. Thank youSue

Need help identifying these window latches tried latches from Home Depot but did not fit

Looking for replacement lift handles, stops and the plastic base located at the bottom of the spiral sash. window attaches to the plastic base to facilitate the tilting operation.

Window is NAMI code A-162-1 series 385 DH-R30 MST 3860. I need a pivot bar I have the screw and case. Which one would I buy?

I am looking for two 11 1/2" long (from top to bottom) patio door handles. The first screw is 3/4" from the top of the handle, the middle screw is 4 5/8" from the top of the handle,and the bottom screw is 8 5/8" from the top of the handle. They are white and a photo is attached. we need the two outs ... (cont.)

These photos may not be the best! Could not find numbers or names or markings. These parts are what help the window go up and down. the strings & the metal cylinders are no longer tight. If you can not make out the items in these photos I will try to get a different angle

The above pictured tilt latch has a number on the slide: L306. It is spring loaded and rounded on the closed side. The dimensions are: 3,3/8" long, 1" wide. Screw holes are 3/4" from each end and 2" apart center to center. The manufacturer was Atrium Windows. Thank you for your assistance. ... (cont.)