Viewing all customer Discussions for:

26-344 Top Tilt Latch Pair, 2", 3/4"

I took this picture on 1/4" graph paper. The L-305 marking is on the main body piece and the L-306 and L-307 markings are on the sliding latch piece.

when I open the window it falls forward because the tabs inside the mechanism, lock are broken off. I really bad hazzard.

There are spring-loaded latches on each side of the window, which keep it in track, when opened, and you press to release window for cleaning. Space between screw holes is 2" or 5cm. Do you have replacements in white?

Hi there! Any way you can guide me to the exact parts I need? I can't tell if they're a red or yellow rod. The window latches are 1x3" with a distance of two inches between the screws. Thank you!Ben

I am missing the part on the left ( missing in picture ) . I included one that is installed and working . Also included a pic of the thing in the middle that says GA . My home was built between 10 to 12 years ago .

We broke a latch that keeps our single hung window in place but allows us to flip the window down to clean the outside. Administrator windows. Do you have any of these?

I have some damaged windows in need of repair! The latches that enable the window to pull inward for cleaning are broken, and one of the pivot pins on the bottom corner of the sliding pane is broken. Some of the molding just above the latches is broken as well. The latches that lock the window sa ... (cont.)

I need to order Sash Guides for Krestmark windows sandstone color. S-175 is on a packing slip I received before. I am in need of 7 pairs (7 left side and 7 right side)

Could you please identify this part and let me know if you have it in stock Thank you!

I need a left and right tilt latch for a Gapco series 1511 window.

Metal part that attaches to casement is broken.

I believe the window brand is General Aluminum based on the "GA" marking on the window. One part is the pivot bar and the other one is the tilt latch. I can't find any place that has any stock of those parts.

Tilt window latch failed picks and dimension included in photos

Good morning, I ordered the wrong size (26-344:top tilt latch and 90-077A:window lock) can you please help me get the right ones. Thank you!

No names,surface mounted on top of tilt windowCould not seem to find a match on your website. One I saw looked to be correct but the measurements were different than mine

Holes are 2 inches apart, width is 1 inch, length is 3 1/2 inch, length from right hole to end is 3/4 inch. I believe it is an Ellison window.

This little part is broken. You can see the crack if you look closely at the picture. Because of this, the window sometimes falls out of the track. I contacted Atrium Windows (which is what our windows are) and they gave me you website because their west coast facility is no longer open. Hoping ... (cont.)

Tilt latch is 3" long 1 inch wide with 2 screw holes to attach. Lock is 3 7/8 " long and base is 3/4 "wide with 2 screw holes lock mechanism extends 3/8 into lock. Finger pulls are 2 7/8" long and 1 " wide with 2 screw holes.

2 5/8L1 1/4WHoles are 1 7/8 a partColor is called driftwood (sage green)What would be the proper replacement. Windows are aluminum. Thank you,John

need help finding this left and right