Viewing all customer Discussions for:

75-081 90 Degree Angle Prybar/Scraper

Hello, I am looking for replacement hardware for these Swisco Truth items. Please advise availability and pricing. Need between 2-5. Thank you!

I need help identifying the correct replacement handle for my awning window. The original handle is broken and missing, so I am not sure which exact part I need. I’ve attached a picture of the full window for reference. Could you please let me know which handle would be the right replacement a ... (cont.)

The photos are for the opening hardware for what I believe to be a Guardian product. Looking to replace the hardware you see in photos.

I am seeking replacement handles for a few transom-type windows (? terminology?), that are hinged on the top and open with a side-swing of the handle as shown in the picture. The logo says "Vistarama Windows" and the house was built in the 1960's so I am guessing that they are from that era. If you ... (cont.)

I have found nothing other than what is in the pictures..I'm not sure on where to take measurements from..The width of the window is 41" and the arms span when closed is 18 3/4

Want to make sure this lever can be replaced by your product 39-070. The measurements appear to be identical. Thanks for any help.

I spoke with somebody on the phone about figuring out how to get the door open because it's stuck locked. I don't know who I talk to, but they said sending the picture and you guys would get back to us. Thank you. Wayne

Pictures of adjacent window. Knurled crank mechanism is stripped inside housing so can't open window to remove sill or access parts. No names or numbers visible anywhere.

Note: The question is related to the video: "Watch How To Repair A Casement Window Crank Operator". Hi, this video is exactly what I was looking for except that my window frame, and the trim on the sill (mentioned at 1:03 of the video), are not in wood (see pictures). How should I proceed in this c ... (cont.)

Dear there, I looked at your website, and found my window looks like casement window. Currently my window opener is broken (I can open the window, but cannot close it, the handle will be off when I close it. See the attached pictures. Could you please which parts I need to buy? Thanks a lot! Jon ... (cont.)

I don't see where replacement roller width is posted, what is inside width of the roller and will it ride on a 5/16" track? I am replacing rollers on a Pella wood frame door. See Photo. The "slot" the roller fits into is about 11/16" wide. Thanks, Randy

I had to break in because I locked myself out. Pried the window open and now can't close all the way.

I need to replace two right-side operators, two left-side operators, and one left-side latch (opposite to shown in photo. One of the operators is identified as an "Entry Guard, Truth" with Part Nos. 30841L and 20810 visible. I also need to order one of your Pry Bar and Scraper Tool (#75-081).Thank ... (cont.)

Back when I was younger i had a deglazer tool that you could fit into a drill and it would "easily" remove hard glazing material. It was like a router bit but it would only take out the glaze and not the wood. Using a heat gun I seem to crack as many windows as I remove the old glaze from. Your comp ... (cont.)

House built 1960. These are LE-ALCO Storm Windows. Whoever put them in, set them in a bed of caulking to make them air tight, so they are....in there. Can't get 'em out. I took out the screws on the frame but the storm window won't come out. There are 2 screws on the SIDE of the storm window. Can' ... (cont.)

How to replace 33170 blade

Trying to replace broken wire glass in very old Kawneer door. Have replace newer models several times. This old door does not change like the other doors. It appears that the pieces that hold the glass are connected. They do not pop out. I could break out the glass the rest of the way but how do I g ... (cont.)

We are unable to unlock our slider door. I removed the brass handles on the inside and outside and found your company name - but no part number.Am enclosing pics of the handles as well as on of the door and frame with the silver box which contains the piece the lock hooks onto (the frame is on the l ... (cont.)

I have several casement operators that need to be replaced. Can you advise as to the appropriate replacement models / process for retrofit? The mechanism appears to be located inside the wood frame. For completeness, I am attaching a photo of the locking mechanism as well. Thanks! ... (cont.)