Viewing all customer Discussions for:

75-081 90 Degree Angle Prybar/Scraper

Hi, When I turn to the right to close window the inner spindle and top nut pops out and unscrews itself. It does not come entirely out but I can screw it back in and put nut back on. It does not stay put when I turn to right to close. It will work turning left to open window. I've tried hammer ... (cont.)

38-099 seems to be my window lock, it has locked closed and I can not get the window open now? Lever just flips up and down and will not work anything, not open or unlock window? How do I get this window open or part off to replace?

As a homeowner who knows the basics, is this replacement part easy to install ? I think it needs replacement because the handle does not open smoothly and I have to fight with it to open the window even partially. 39-286 is the handle I have

Hello: My operator seems identical to the 39-035 except it doesn't have a hinged arm. My arm is about 8" long tip to pivot point on the gear. Questions: 1. Do you have a 39-035 operator with a straight arm? If yes, price and delivery? 2. The gear seems to cover the mounting screw hole howeve ... (cont.)

Hi I have never installed one of these cranks before: I bought the replacement part(s) from Home Depot, and was advised I might find "how to install" instructions on-line. Can you please provide a link? Or better yet: easy instructions. The window is on an upper floor requiring a very tall lad ... (cont.)

Hi - Just discovered your company and am very happy that I may be able to replace parts of broken casement windows instead of getting new windows! I have 1980 Weather Shield Casement windows. Am stumped on how to remove the crank handles. I do not see any set screw visible. Does the handle just ... (cont.)

I am trying to fix Truth entrygard gears and arms on a vinyl window. I can't seem to figure out how to remove the vinyl window parts to access the screws to remove the operator gears and arms. I've removed the plastic cover and can see everything I need to see, even the screws, but can't get to th ... (cont.)

What is the procedure to replace this type of operator. Does the cover pry off, or do you remove the wood piece around the lever on the inside?

Please refer to the photo(s) submitted - I believe I have the No. 20810 left hand crank, offset (4-7/16") down. This part has failed and I am looking to replace it. Thanks!

I need to replace a awning operator with the measurements of appox, 16" from the window attachment crack out to the inner connection. My best guess of the arms at full close is just over 21". How does one remove the old operator. Is there a special tool or trick to do this? Thank you ... (cont.)

Please explain how to replace the 39-096 and 39-097 in an existing mounted window? Do they just side in and out? Do I have to some how dismantle the bottom molding (without breaking it) to access the cranks? Please advise

I have a truth casement window awning style opening, I need bottom center crank out assembly with double opening arms 13" long. I did not see it on your website. any thoughts Thanks

we have LP windows (American Seal) they were purchased approx 14 years ago and one of the crank assemblies is broken. the worm gear just spins out of the housing when you try to close the window. it appears as though the housing is stripped out where the keeper bushing screws in on top of the worm g ... (cont.)

I am replacing a 39-156 crank in my home. The 4 mounting screws are under bottom moulding and hard to extract. Can i pry this moulding off and replace it after i get the crank installed ? or should i use special scrwedriver ? thanks

I currently have an Entry Gard Truth hardware on my windows with a part # 30842R. Is the part # on the website (39-032) the part I would need to replace mine. How difficult is it to get the existing parts out to replace with the new? Does one need to also replace some of the bottom casing of the ... (cont.)

Hi I have a number of windows that the crank to open the window no longer opens the window. Entryguard truth is stamped on the longer of the two arms. the longer arm is 9.5 inches and the shorter hinged am is 3 13/16 of an inch. I believe your product 39-155 and 39-156 seems to match the dimensions. ... (cont.)

Hi, How do you remove the screws on the crank operator? Please see attached. The screws are hidden under the wood frame. Thanks

I need to know how to remove the molding to access the crank screws for replacing the the crank.

I have a Caradco awning window that has a broken crank mechanism made by Truth. I think the proper replacement part is your number 39-083 Dual Arm Crank. My question before ordering a replacement crank centers on the proper removal of the old hardware. It seems that the mounting screws are accessed ... (cont.)

Hello Swisco, I have one right hand and one left hand casement window with damaged Bilt Best operators. The crank handles are no longer attached to the operators. From the attached photos can you help me identify the parts I will need to order? Thanks in advance for your help!