Viewing all customer Discussions for:

39-109B 3/8" Handle for Pella

Hello. I want to repair and replace the crank assemble on my casement window. Enclosed is a picture of the crank assembly open and closed. I believe it is an Andersen window, installed as new construction in 1989. I can't find it on your website, although I found the crank arm and cover and have ... (cont.)

Hello, New owner of this home and I need help getting a couple windows back to operational. I have one casement with hinge on right as face from inside. Another window has two glasses hinging on far left and far right. All missing same parts. I need cranks for each and whatever it is I'm missing ... (cont.)

I need a right and left hand set of opener gears and handles to crank them open. Are you able to find after market parts for that brand? What measurements do you need if so?ThanksDeb

Very old window operator

I need to replace the operator (12") on one of my windows as it has a broken shank that I cannot attach a crank to. For now I am using a screwdriver. Also need 3 replacement crank handles. These seem to be larger than what is typical nowadays and have a deeper hole to accomodate the 1" shaft on the ... (cont.)

The crank needs to be replaced. It would be very appreciated if it can be identified so that a replacement can be purchased. Thank you.

Hi, I moved into an older house and the cranks are missing on my windows - I'd like to replace them if I can. Windows are likely from the 70's or 80's. Here are the specs: There's a notch in the gear, as well as a second gear at the base of the spline. Both gears have 11 teeth. I measured the b ... (cont.)

Looking for replacements. Have RH and LH swing. Stamped on arm is "W.L."

Looking for the attached part to go with new cranks Part #39-109B

Do you have a replacement for pella window crank 624x?

will an old style Pella window crank handle fit on this extension? Pella 39- 109b Thanks, Al

3/8" post with 12 splines. Approximately 1 1/4 in length.

Looking to swap out old cranks on Pella series windows. Looking for something compatible with the photos below.

I have older pella window with cranks and want to update cranks. Need a recommendation please.

new a replacement handle and closer in chrome, and a handle in gold finish. windows are out of the 50s, any recommendations?

looking to replace some window cranks for Pella casement window. The building was built in the late 70's or early 80's. Also, the windows had screens which were retractable upward and blinds which hung between the glass. The blinds no longer exist. Are the creens replaceable?

Hi! I'm looking for these Pella handles manufactured by Truth. I believe they are 5/16 as the 5/32 did not fit; however, when I spoke with Pella they said the handles were updated and now are considered left and right handles and I would need 0BU9D000 and 0BV9D000. Do you have the original or newe ... (cont.)

Pella crank,,,,copperite,,,,,need 2,,,,,this look right?

I do not know the manufacturer of the casement window in my daughter's bedroom. It is probably at least 30 years old or more. One of the few windows we did not change. I need to find a handle for the crank. I tried a universal replacement and also a folding handle but they slip and do not catch on t ... (cont.)

Hello. I'm wondering if: 1) the cranks in my my older (some are as old as 1988) Pella windows (see pics) can be replaced with a folding crank like my newer Pella windows. 2) or is my only option the t-crank handle? 3) is the t-crank handle a lot less functional than the large handle? i.e., do ... (cont.)