Viewing all customer Discussions for:

33-073 8-15 x 1/2" Truss Head SS Phillips Screw

replacrment for 832 springs and holders for certainteed windows

Hi there, I will appreciate your help to find the right replacement part for this broken sash lock. The egress window is 46" high x 27" wide. It is urgently needed. Let me know if you need anything else

please help

I'm looking for some older sliding window parts... I believe these to be about ten years old. Please let me know if you can find anything thanks.

33.5x16" window. Single coil on each side. 1" opening where coil balance is. I cannot find any markings on the existing coil or any brand/description. The window will not stay open, as it appears that the coil snapped. Any help is appreciated!

Hello, We are looking for replacement Channel bars for our Weathervane Wood Windows. I know they are about 25 1/2 Inches. The plastic part at the top does not seem to match what you show. Can you help at all with this? I can send some pictures if needed. Thank you, 25Inches 2440 Stamp 1/2 ... (cont.)

NEED 2 PIVOT SHOES AN COIL BALANCES FOR UNKNOWN BRAND OF VINYL WINDOW..

I have 4 windows which need new Pivot Bars. It appears that the bars are held in place with, what appears to be 2 rivets. The picture shows the rivet that was removed from the pivot bar in the picture. Can the rivet be replaces with a screw

I need replacement pivot bars for a silver line upper window sash. I don't know the window model number but the pivot bar part number is 1054. First I tried swisco part number 26-400. Didn't fit. The screw holes didn't line up. The I tried part number 26-369. The holes lined up but the flare was too ... (cont.)

I have 2 windows that need all 4 balances replaced. I know they are 29" by 3/8" red balances. But I can't tell what kind of foot they need. Can you tell from these photos? They are aluminum non-tilt windows, likely made in the 70s.

Looking for replacement parts. The coil has an 8 stamped on it.

I bought the 84-086 screen door roller pairs (3) on order 2067548. They appear to be a good match for my originals. Except one thing. The new screw holes are smaller than my screws from the original pair. (You don't include screws with this product.) If I find screws that will go through the holes i ... (cont.)

If you happen to know who makes this or where to locate the correct complete replacement parts for the sashes please let me know. thanks

From replacement windows Window Depot, York pa, 2012.

Looks like a double coil assembly, the pivot shoes do not look replaceable? No identifying numbers anywhere. This is the only window this size in our home. All the others are the same manufacturer but different sizes.

Hi, I need some coil balance complete set for my 5 windows, I see on coil balance here shows "8" stamped print, is this the weight of each side of window? Please suggest me ASAP the right product parts I buy from your website here, thanks!

Any idea how to remove pivot bar pins? They don't have a screw, just held with these pins that are very malleable. I'm stumped.

I'm looking for balances for our Metal Industries windows. Windows are from the early 90's, purchased from Hechingers. The channels are approximately 1-1/4" Wide and 9/16" deep. 1/2" wide Flat spring steel between the upper piece and the lower piece(pivot for tilt windows). Thanks for any help. Ken ... (cont.)

Hi , I have ordered in the past and the part # 15-180 seemed to work well but was hoping to get a few complete units, spring, housing and shoe, did see anything that looked to match .

I have no idea what brand window this came out of. I know its a single hung tilt wash window. I need two of these. Cant find any numbers or lettering on it to help identify it. Im not even sure if all the pieces are here. Im hoping you can help me identify it or suggest something I could use to ... (cont.)